Gas Burner & Control Components Parts

Gas burner valve solenoids. Kit contains both the two wire and three wire solenoids. One solenoid is the primary and one is the safety. Both have to operate for the gas valve to open. Usually, one of them burns out but you should always replace them as a set.

Manufacturer Number 279834

These often fail intermittently, making diagnosis difficult. To test, watch the burner assembly while the dryer is heating. If the igniter glows for a while and then shuts off without the gas turning on, it usually means one of these coils is bad.

LP conversion kit

Manufacturer Number 49572A

Burner cap, 1 BLACK cap with spark electrode, *no gasket seal required

Manufacturer Number 3412D024-09

Double burner kit

Manufacturer Number WB16K10026

Conversion kit, Natural to LP gas

Manufacturer Number 4948EL4002B

Gas valve solenoid coil kit, both 2 and 3 wire coil in kit

Manufacturer Number 5303931775

Top burner, medium

Manufacturer Number WB16K10055

LP conversion kit

Manufacturer Number W10317689

Lp kit

Manufacturer Number 383EEL3002D

Burner cap, 1 GRAY cap with spark electrode, *no gasket seal required

Manufacturer Number 3412D024-26

Two coil gas valve conversion kit, natural to LP gas, with instructions

Manufacturer Number WE25X217

Burner cap, medium, gray

Manufacturer Number WB29K10004

Conversion kit for allowing range to be converted to LP from Natural gas. Includes instructions.

Manufacturer Number GRLP3

Converting a gas range from natural gas to LP or vice versa is something we recommend be done by a qualified appliance repair person due to the volatile nature of gas and the potential for serious injury, if a problem occurs.

Gas burner orifice, propane

Manufacturer Number WB28K10376