Jenn Air Gas Burner & Control Valve Parts

Gas burner valve solenoids. Kit contains both the two wire and three wire solenoids. One solenoid is the primary and one is the safety. Both have to operate for the gas valve to open. Usually, one of them burns out but you should always replace them as a set.

Manufacturer Number 279834

These often fail intermittently, making diagnosis difficult. To test, watch the burner assembly while the dryer is heating. If the igniter glows for a while and then shuts off without the gas turning on, it usually means one of these coils is bad.

Sealed gas burner head assembly, 1 BLACK burner head with spark electrode. *No gasket seal required per manufacturer.

Manufacturer Number 3412D024-09

Sealed gas burner head assembly, 1 GRAY burner head with spark electrode. *No gasket seal required per manufacturer.

Manufacturer Number 3412D024-26

Sealed gas burner head assembly, TAUPE with spark electrode. *No gasket seal required per manufacturer.

Manufacturer Number 3412D024-28

Front burner assembly, black (Glossy Finish)

Manufacturer Number 7505P283-60

Rear burner assembly, black (Glossy Finish)

Manufacturer Number 74005189

Gas burner orifice

Manufacturer Number 5187M026-60

Gas valve leak limiter, Natural gas

Manufacturer Number 694424

Burner

Manufacturer Number 3403M075-10

Burner cap, small, black

Manufacturer Number 3191898

Front burner, white

Manufacturer Number 7505P285-60

Two burner gas module complete with white burner assembly and pan, matte gray grates,

Manufacturer Number AG202MG

Rear burner, white

Manufacturer Number 7505P286-60

Top burner assembly, dual

Manufacturer Number 74003332