Get Repair Help

Shop for Parts

Enter your part or model number for best results

Frigidaire Range/Stove/Oven Fault Codes Version 1

Failure Code	Condition	Check/Repair
F2	Oven temp is above design specifications	Oven temp has risen above 665F and door unlocked or above 965F with door locked. Check oven temperature sensor.
F3	The oven temperature sensor is open	Check for open wire connection between EOC (Electronic Oven Control - Clock) and the oven temperature sensor. Replace sensor if no wiring problem.
F4	The oven temperature sensor is shorted	Check for shorted wire and/or connections between the EOC (Electronic Oven Control - Clock) and the oven temperature sensor. Replace sensor if no wiring problem.
F5	The watchdog is active when it should be off	Microprocessor checking the operation of the EDC relay, after selection of bake, broil, or clean operation. Relay failed this check.
F6	No 60 Hz time base	60 Hz time base is required for time controlled cycling. Replace EDC.
F7	Lock motor relay watchdog circuit is active when it should be off	Microprocessor checking the operation of the EDC lock, relay failed. Replace EDC.
F8	Lock motor relay watchdog is active when it should be off	Microprocessor checking the operation of the EDC lock relay after self clean is selected, relay failed. Replace EDC.