Get Repair Help

Shop for Parts

Enter your part or model number for best results
Search
Help Me Find My Model Number
Back

Fault Codes

GE WSL Model Washing Machine

Failure
Code
Condition
Check/Repair
IE - Water level sensor error
Water sensor fails to send signal for longer than 5 seconds.
Press POWER button. No other buttons work:
· Check wiring harness
· Check pressure sensor switch
· Check circuit board
7E - Water supply error
No frequency change for 60 minutes from water supply.
Press POWER button. No other buttons work:
· Check wiring harness
· Check water valve· Check pressure sensor switch
· Check circuit board
E - Drain pump error
Water level does not decrease to reset point within 15 minutes from draining water from the washer.
Press POWER button. No other buttons work:
· Check wiring harness
· Check pump motor
· Check circuit board
dE - Lid open error
Lid is open during wash cycle.
Close lid.
· Check wiring harness
· Check lid switch
· Check unbalance switch
· Check circuit board
UE - Unbalance switch error
Unbalanced load is sensed three times during a spin operation.
Open lid. Rebalance laundry load and close lid.
· Check wiring harness
· Check unbalance switch
· Check circuit board
OE - Water overflow error
Water supply does not stop after sensing an overflow condition.
Turn off household water supply to washer and unplug power cord.
· Check wiring harness
· Check water inlet valve
· Check pressure sensor switch
· Check circuit board