Enter Part or Model Number for best results

(Where is my model number?)
Back
Got a Thumping Noise?
You Can Do It

Fault Codes

Jenn Air Newer Style Range/Stove/Oven

Failure
Code
Condition
Check/Repair
F1
Power to element relay energized during time of day display
Wiring harness shorted or change power relay board (PRB)

Note: for double ovens, change second oven board
F2
Oven temp sensed; over 600F sensed by control in time of day mode, bake mode, or over 900F sensed in clean mode.
Ohm test the oven temperature sensor, if OK, change power relay board.
F3
Cooling fan on with no oven function selected
Check oven temperature sensor or wire harness to oven temperature sensor
F4
Shorted oven temperature sensor
Check oven temperature sensor or wire harness to oven temperature sensor
F5
Power to element relays disabled in cook mode
1. Intermittent oven temperature sensor or wire harness or,
2. Intermittent contact on power relay board
F7
Shorted key sensed for 32 seconds
1. Membrane shorted, or,
2.
Display board defective
F8
Shorted meat probe alarm
1. Probe jack or harness to probe jack, or,
2.
Probe sensing temp above 250F
F9
Door lock safety circuit on power relay board sensed
Replace power relay board
FF
Invalid temp reading on power relay board (PRB)
Check oven temperature sensor and wire harness, or replace power relay board
F
Communication error between boards
Wiring harness, check harness wires for continuity, or replace power relay board
FC
Communication error between boards
Wiring harness or power relay board (PRB)
FR
Second oven error sensed
1. Check oven temperature sensor and harness, or,
2. Replace second board