GO
SEARCH:
Back

Fault Codes

Roper Alternative 2 Digit Fault Codes

Failure
Code
Condition
Check/Repair
F1
Analog to Digital Failure
Disconnect for 30 seconds - if display re-appears - replace control
F1
Safety flip flop
Replace component
F1
Shorted keypad
Replace component
F3
Oven temperature sensor opened
Measure oven temperature sensor resistance, should be1100 ohms. If not, replace sensor
F2
Oven temperature sensor shorted
Replace oven temperature sensor
F3
Oven too hot
Replace oven temperature sensor
F3
Clean temp too hot
Replace oven temperature sensor
F5 Check door/latch switch Replace component