Enter Part or Model Number for best results

(Where is my model number?)
Back
Got a Thumping Noise?
You Can Do It

Fault Codes

Amana "Big Oven" 5.1 cubic ft. (Sigma Touchmatic ERC)

Failure Code
Condition
Check/Repair
F0-0
No Error
Initial factory setting
F1-1
Over temperature while cooking
Check oven temperature sensor and wiring first, replace control board if oven temperature sensor is good
F1-3
Over temperature while cleaning
Check oven temperature sensor and wiring first, replace control board if oven temperature sensor is good
F1-5
Cancel key input out of range
Replace control board
F1-7
Keyboard disconnected
Verify wire connection is tight.Replace control if failed
F1-8
Shorted key
Replace control board
F1-9
Slave micro not functioning
Replace control board
F1-A
Circuit board grounding
Replace control board
F1-C
Control not calibrated
Replace control board
F1-E
Circuit board data corruption
Replace control board
F1-F
Circuit board data corruption
Replace control board
F1-H
Door switch input circuit failure
Check switch and wiring
F1-J
Latch switch input circuit failure
Check switch and wiring
F3-1
Oven temperature sensor or oven temperature sensor circuit failure
Check wire connections and oven temperature sensor
F9-1
Auto latch will not lock
Check wiring, motor, and latch switch
F9-2
Auto latch will not unlock
Check wiring, motor, and latch switch