Enter Part or Model Number for best results

(Where is my model number?)
Back
Got a Thumping Noise?
You Can Do It

Fault Codes

Whirlpool Range/Stove/Oven Fault Codes-Common

Failure
Code
Condition
Check/Repair
Digit Failure Code
2
F1
Analog to Digital Failure
Disconnect for 30 seconds - if display reappears - replace control board
F1
Safety flip flop
Replace board
F1
Shorted keypad
Replace keypad
F3
Oven temperature sensor opened
Replace oven temperature sensor
F2
Oven temperature sensor shorted
Replace oven temperature sensor
F3
Oven too hot
Replace oven temperature sensor
F3
Clean temp too hot
Replace oven temperature sensor
F5
Check door/latch switch
Replace switch if defective
4 Digit Failure Code
F1 - E1
Safety flip flop
Replace board
F2 - E0
Shorted keypad
Replace keypad
F3 - E0
Oven temperature sensor opened
Replace oven temperature sensor
F3 - E1
Oven temperature sensor shorted
Replace oven temperature sensor
F3 - E2
Oven too hot
Replace oven temperature sensor
F3 - E3
Clean temp too hot
Replace oven temperature sensor
F5 - E0 F5 - E1 and E2
Check door/latch switch
Replace switch if defective