Enter Part or Model Number for best results

(Where is my model number?)

Frigidaire Dishwasher Won't Drain

FGHD2433KF1

The 5 most common part(s) or condition(s) which contribute to the symptom Dishwasher won't drain are listed below. Check or test each item and watch any available videos. If you are still unable to solve the problem you may need to do additional research and troubleshooting. Remember, with our 365 Days. Period.® return policy you can return any part for any reason. So, go ahead and buy it to try it. No other parts retailer offers this unconditional return policy.

For the symptom you selected, these are the most common parts or causes, ordered by the likelihood of fixing the symptom.

Grid is 1 inch square
Drain Pump - Part # 3015405 Mfg Part # A00126401

Drain Pump

RepairClinic Item # 3015405

If the dishwasher won't drain, the drain pump might be defective. Test the pump motor with an Ohm meter. Drain pumps are not repairable, if it's defective it will need to be replaced.

Order now and this item will ship out tomorrow - or it's FREE!

$39.70

Grid is 1 inch square
Drain Valve - Part # 2980544 Mfg Part # 807048001

Drain Valve

RepairClinic Item # 2980544

The drain valve can get clogged with debris and should be cleaned out if the dishwasher won't drain. If it seems clear of debris but won't actuate, it will need to be replaced. The drain valve is not repairable.

Order now and this item will ship out tomorrow - or it's FREE!

$3.25

Other Causes and Conditions

Clogged or Improperly Installed Garbage Disposer

If the dishwasher won't drain and the garbage disposer was installed recently, the installer might have forgotten to knock out the drain plug from this disposer. All garbage disposers are sold with a solid plug in the drain tube for situations where a dishwasher isn't connected. However, if the dishwasher is connected, the plug will need to be removed. If the disposer wasn't replaced recently, remove the dishwasher drain hose from the disposer and clean out both the fitting on the disposer and the end of the drain hose. These are the most common places to find an obstruction if the dishwasher won't drain.

Grid is 1 inch square
Drain Hose - Part # 3276641 Mfg Part # 807117001

Drain Hose

RepairClinic Item # 3276641

If the dishwasher won't drain the drain hose might be clogged. Remove the drain hose from both the dishwasher and the sink drain to clean it out. The most common place for an obstruction is at the garbage disposer.

Order now and this item will ship out tomorrow - or it's FREE!

$18.50

Grid is 1 inch square
Check Ball - Part # 419200 Mfg Part # 154246402

Check Ball

RepairClinic Item # 419200

If the dishwasher won't drain the check ball might be stuck. The check ball is a small plastic ball in the check valve which prevents water from returning to the dishwasher after it has drained. If the ball gets stuck, it will prevent the water from draining also. The check valve is the device that the drain hose is attached to on the dishwasher.

Order now and this item will ship out tomorrow - or it's FREE!

$24.05

Back to Symptom List