Enter Part or Model Number for best results

(Where is my model number?)

Hotpoint Dishwasher Won't Drain

HDA2100N10WW

The 5 most common part(s) or condition(s) which contribute to the symptom Dishwasher won't drain are listed below. Check or test each item and watch any available videos. If you are still unable to solve the problem you may need to do additional research and troubleshooting. Remember, with our 365 Days. Period.® return policy you can return any part for any reason. So, go ahead and buy it to try it. No other parts retailer offers this unconditional return policy.

For the symptom you selected, these are the most common parts or causes, ordered by the likelihood of fixing the symptom.

Grid is 1 inch square
Drain Solenoid Kit - Part # 1263990 Mfg Part # WD21X10268

Drain Solenoid Kit

RepairClinic Item # 1263990

If the dishwasher won't drain, the drain solenoid kit might need to be replaced. The drain solenoid is an actuator that opens a flap to allow the water to drain.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

$18.85

Grid is 1 inch square
Drain Valve - Part # 270153 Mfg Part # WD1X1316

Drain Valve

RepairClinic Item # 270153

The drain valve can get clogged with debris and should be cleaned out if the dishwasher won't drain. If it seems clear of debris but won't actuate, it will need to be replaced. The drain valve is not repairable.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

$17.85

Grid is 1 inch square
Pump and Motor Assembly - Part # 1811038 Mfg Part # WD26X10051

Pump and Motor Assembly

RepairClinic Item # 1811038

If the dishwasher won't drain, the pump and motor assembly might be defective. If the motor runs during the drain cycle, check for a blockage in the drain line. If the motor won't run during the drain cycle or if it just hums when it should be running, the pump and motor assembly might need to be replaced.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

$150.40

Other Causes and Conditions

Clogged or Improperly Installed Garbage Disposer

If the dishwasher won't drain and the garbage disposer was installed recently, the installer might have forgotten to knock out the drain plug from this disposer. All garbage disposers are sold with a solid plug in the drain tube for situations where a dishwasher isn't connected. However, if the dishwasher is connected, the plug will need to be removed. If the disposer wasn't replaced recently, remove the dishwasher drain hose from the disposer and clean out both the fitting on the disposer and the end of the drain hose. These are the most common places to find an obstruction if the dishwasher won't drain.

Grid is 1 inch square
Drain Hose - Part # 783289 Mfg Part # WD24X10014

Drain Hose

RepairClinic Item # 783289

If the dishwasher won't drain the drain hose might be clogged. Remove the drain hose from both the dishwasher and the sink drain to clean it out. The most common place for an obstruction is at the garbage disposer.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

$16.45

Back to Symptom List