Enter Part or Model Number for best results

(Where is my model number?)

Kenmore Dishwasher Won't Start

665.16462300

The 8 most common part(s) or condition(s) which contribute to the symptom Dishwasher won't start are listed below. Check or test each item and watch any available videos. If you are still unable to solve the problem you may need to do additional research and troubleshooting. Remember, with our 365 Days. Period.® return policy you can return any part for any reason. So, go ahead and buy it to try it. No other parts retailer offers this unconditional return policy.

For the symptom you selected, these are the most common parts or causes, ordered by the likelihood of fixing the symptom.

Grid is 1 inch square
Thermal Fuse - Part # 959376 Mfg Part # 8193762

Thermal Fuse

RepairClinic Item # 959376

If the dishwasher won't start the thermal fuse might have blown. The thermal fuse helps to prevent damage to the dishwasher by turning off power so that it doesn’t overheat. Once blown, the thermal fuse will have to be replaced for the dishwasher to work. The thermal fuse is usually located in the control panel on the control board or mounted to the bottom of the tank behind the lower panel. The thermal fuse can be checked for continuity.

Order now and this item will ship out tomorrow - or it's FREE!

Grid is 1 inch square
Door Switch - Part # 830947 Mfg Part # 8269209

Door Switch

RepairClinic Item # 830947

The door switch, or switches, are sometimes called interlock switches. The door switch prevents the dishwasher from running while the door is open. If the dishwasher won't start, the switch or switches might be defective. To access the door switches, remove the control panel or inside door panel - depending on the model. They can be tested for continuity.

Order now and this item will ship out tomorrow - or it's FREE!

Grid is 1 inch square
Door Latch - Part # 1018133 Mfg Part # 8193882

Door Latch

RepairClinic Item # 1018133

If the dishwasher does not start, the door latch assembly might be defective. These are normally made of plastic and cannot be repaired. If the door won't latch and the door latch is broken, replace it.

Order now and this item will ship out tomorrow - or it's FREE!

Grid is 1 inch square
Main Control Board - Part # 1060953 Mfg Part # 8564543

Main Control Board

RepairClinic Item # 1060953

The main control board provides power to nearly every component of the dishwasher. If the dishwasher won't start the main control board might be defective. You should first check for more common parts. Many times control boards are replaced unnecessarily because the problem was not diagnosed properly.

Order now and this item will ship out tomorrow - or it's FREE!

Grid is 1 inch square
Touchpad and Control Panel - Part # 1028233 Mfg Part # 8542350

Touchpad and Control Panel

RepairClinic Item # 1028233

If the touchpad is defective, the control board might not get the signal for the selections made. If the dishwasher won't start and the display doesn't seem to change properly when the buttons are pressed, the touchpad might need to be replaced. On some models the touchpad and control panel are sold together and will need to be replaced at the same time.

Order now and this item will ship out tomorrow - or it's FREE!

Grid is 1 inch square
Touchpad and Control Panel - Part # 1028234 Mfg Part # 8542351

Touchpad and Control Panel

RepairClinic Item # 1028234

If the touchpad is defective, the control board might not get the signal for the selections made. If the dishwasher won't start and the display doesn't seem to change properly when the buttons are pressed, the touchpad might need to be replaced. On some models the touchpad and control panel are sold together and will need to be replaced at the same time.

Order now and this item will ship out tomorrow - or it's FREE!

Grid is 1 inch square
Touchpad and Control Panel - Part # 1028235 Mfg Part # 8542352

Touchpad and Control Panel

RepairClinic Item # 1028235

If the touchpad is defective, the control board might not get the signal for the selections made. If the dishwasher won't start and the display doesn't seem to change properly when the buttons are pressed, the touchpad might need to be replaced. On some models the touchpad and control panel are sold together and will need to be replaced at the same time.

Picture Unavailable

Touchpad and Control Panel

RepairClinic Item # 1028285

If the touchpad is defective, the control board might not get the signal for the selections made. If the dishwasher won't start and the display doesn't seem to change properly when the buttons are pressed, the touchpad might need to be replaced. On some models the touchpad and control panel are sold together and will need to be replaced at the same time.

Back to Symptom List