Enter Part or Model Number for best results

(Where is my model number?)

KitchenAid Dishwasher Won't Fill

KUDS230Y0

The 5 most common part(s) or condition(s) which contribute to the symptom Dishwasher won't fill are listed below. Check or test each item and watch any available videos. If you are still unable to solve the problem you may need to do additional research and troubleshooting. Remember, with our 365 Days. Period.® return policy you can return any part for any reason. So, go ahead and buy it to try it. No other parts retailer offers this unconditional return policy.

For the symptom you selected, these are the most common parts or causes, ordered by the likelihood of fixing the symptom.

Grid is 1 inch square
Water Inlet Valve - Part # 3378 Mfg Part # 4171000

Water Inlet Valve

RepairClinic Item # 3378

The dishwasher has an electrical water valve called a water inlet valve. If the dishwasher won't fill with water, the water inlet valve might be defective. These valves are not repairable and will have to be replaced.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

$44.60

Grid is 1 inch square
Float - Part # 747467 Mfg Part # 9743070

Float

RepairClinic Item # 747467

The float assembly is normally inside the dishwasher near the door on the floor of the dishwasher. If something gets stuck underneath it and holds the float assembly up, the dishwasher won't fill with water. If the float assembly moves freely up and down, the float switch might be defective.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

$27.80

Grid is 1 inch square
Float Switch - Part # 747527 Mfg Part # 9743413

Float Switch

RepairClinic Item # 747527

The float switch is actuated by the float assembly. It is a protection device designed to prevent the dishwasher from overfilling. If the dishwasher won't fill with water, it may be because this float switch is defective or stuck.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

$30.10

Grid is 1 inch square
Float Switch - Part # 1460983 Mfg Part # W10207863

Float Switch

RepairClinic Item # 1460983

The float switch is actuated by the float assembly. It is a protection device designed to prevent the dishwasher from overfilling. If the dishwasher won't fill with water, it may be because this float switch is defective or stuck.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

$30.30

Other Causes and Conditions

Water Supply Problem

The dishwasher is connected to the hot water supply from the house. Check to be sure the household water supply valve is turned on. Over time, calcium deposits can build up in the water supply valve or in the small filter screen inside the water inlet valve. The water supply line may need to be removed from the water inlet valve of the dishwasher, then run some water into a bucket to see if there is enough pressure. Be certain to turn off the water before working on the water line.

Back to Symptom List