-
- 1-800-269-2609, 7 a.m. to midnight ET, 7 days
- En Español
- Shopping Cart
- 0 item(s)
The 7 most common part(s) or condition(s) which contribute to the symptom Dryer takes too long are listed below. Check or test each item and watch any available videos. If you are still unable to solve the problem you may need to do additional research and troubleshooting. Remember, with our 365 Days. Period.® return policy you can return any part for any reason. So, go ahead and buy it to try it. No other parts retailer offers this unconditional return policy.
For the symptom you selected, these are the most common parts or causes, ordered by the likelihood of fixing the symptom.
If the dryer won't stop, check the venting. A clogged or partially clogged vent will reduce the air flow through the dryer and greatly increase the drying time.
Item # 687613
If the dryer is slow, the blower wheel might be broken or plugged. The blower wheel is attached to the drive motor and draws the air through the dryer drum. Remove the vent from the back of the dryer and see if the air flow is strong. If not, check the blower wheel.
Order now and this item will ship out today - or it's FREE!
Item # 1180054
If the dryer is slow, the heating element assembly may need to be replaced. The heating element assembly warms the air as it passes over. If the heating element is burned out, or any other part of the assembly is defective, it may not heat. If the dryer is slow, and the vent is clear, this is a common next item to test.
Order now and this item will ship out today - or it's FREE!
Item # 1206293
Although not common, if the dryer is slow check the lint filter. The lint filter can get clogged with fabric softener and not allow enough air to pass through. Clean the filter of any residue that might prevent proper air flow.
Order now and this item will ship out today - or it's FREE!
Item # 525385
The moisture sensor sends a signal back to the control board as it senses moisture in the clothing. If the dryer is slow, this sensor may not be working properly and may be inaccurately sending signals back to the main circuit board.
Order now and this item will ship out today - or it's FREE!
Item # 526282
All dryers have a high-limit thermostat to help prevent fires and damage to the dryer. If the dryer is slow, it can be caused by a defective high limit thermostat turning off the burner prematurely. This is not common.
Order now and this item will ship out today - or it's FREE!
Item # 1181075
The thermistor senses the temperature of the air in the dryer and cycles the heat on and off. If the dryer won't stop, the thermistor may be defective. This is not common.
Order now and this item will ship out today - or it's FREE!
