Enter Part or Model Number for best results

(Where is my model number?)

Estate Dryer Doesn't Heat

TGDS840PQ0

The 7 most common part(s) or condition(s) which contribute to the symptom Dryer doesn't heat are listed below. Check or test each item and watch any available videos. If you are still unable to solve the problem you may need to do additional research and troubleshooting. Remember, with our 365 Days. Period.® return policy you can return any part for any reason. So, go ahead and buy it to try it. No other parts retailer offers this unconditional return policy.

For the symptom you selected, these are the most common parts or causes, ordered by the likelihood of fixing the symptom.

Grid is 1 inch square
Thermal Fuse - Part # 2986 Mfg Part # 3392519

Thermal Fuse

RepairClinic Item # 2986

If the dryer doesn't heat, but the drum turns, check the thermal fuse(s). The thermal fuse protects the dryer from overheating and helps to prevent fires. If the thermal fuse is blown, it will have to be replaced.

Place your order by 3:00 PM ET and choose FedEx 2Day or FedEx Overnight shipping and this item will ship out today - or it's FREE!

$12.05

Grid is 1 inch square
Gas Valve Solenoid - Part # 3479 Mfg Part # 279834

Gas Valve Solenoid

RepairClinic Item # 3479

The gas valve has two or more electric solenoids which open the valve to let the gas flow into the burner assembly. If the dryer doesn't heat one or more of the solenoids may be defective. If the igniter glows for 90 seconds but the burner flame doesn't light, replace these coils as a set.

Place your order by 3:00 PM ET and choose FedEx 2Day or FedEx Overnight shipping and this item will ship out today - or it's FREE!

$13.70

Grid is 1 inch square
Dryer Igniter - Part # 3415 Mfg Part # 279311

Dryer Igniter

RepairClinic Item # 3415

If the dryer doesn't heat, the igniter might be burned out. Check the igniter for continuity with an ohm meter. Dryer igniters burn out over time, similar to a light bulb.

Place your order by 3:00 PM ET and choose FedEx 2Day or FedEx Overnight shipping and this item will ship out today - or it's FREE!

$21.60

Grid is 1 inch square
Flame Sensor - Part # 2681 Mfg Part # 338906

Flame Sensor

RepairClinic Item # 2681

Gas dryers have a flame sensor to detect the heat given off by the flame. If the dryer doesn't heat, the flame sensor might be defective. Check the flame sensor for continuity. This is not as common as a burned out igniter or thermal fuse.

Place your order by 3:00 PM ET and choose FedEx 2Day or FedEx Overnight shipping and this item will ship out today - or it's FREE!

$24.15

Grid is 1 inch square
High Limit Thermostat - Part # 2311769 Mfg Part # W10423382

High Limit Thermostat

RepairClinic Item # 2311769

Although not common, if the dryer doesn't heat the high limit thermostat can be defective. It can be checked for continuity. If the thermostat is "open" the dryer doesn't heat.

Place your order by 3:00 PM ET and choose FedEx 2Day or FedEx Overnight shipping and this item will ship out today - or it's FREE!

$25.45

Grid is 1 inch square
Cycling Thermostat - Part # 2893 Mfg Part # 3387134

Cycling Thermostat

RepairClinic Item # 2893

The cycling thermostat regulates the temperature of the air in the dryer. If the dryer doesn't heat it may be caused by a defective cycling thermostat. This is not common.

Place your order by 3:00 PM ET and choose FedEx 2Day or FedEx Overnight shipping and this item will ship out today - or it's FREE!

$17.40

Grid is 1 inch square
Timer - Part # 831501 Mfg Part # 8299765

Timer

RepairClinic Item # 831501

The timer is normally not at fault if the dryer doesn't heat. In many situations where timers are replaced they end up being returned. Check all of the more common components in this troubleshooting guide before replacing the timer.

Place your order by 3:00 PM ET and choose FedEx 2Day or FedEx Overnight shipping and this item will ship out today - or it's FREE!

$117.80

Back to Symptom List