Enter Part or Model Number for best results

(Where is my model number?)

Maytag Dryer Doesn't Heat

MDG9700AWW

The 3 most common part(s) or condition(s) which contribute to the symptom Dryer doesn't heat are listed below. Check or test each item and watch any available videos. If you are still unable to solve the problem you may need to do additional research and troubleshooting. Remember, with our 365 Days. Period.® return policy you can return any part for any reason. So, go ahead and buy it to try it. No other parts retailer offers this unconditional return policy.

For the symptom you selected, these are the most common parts or causes, ordered by the likelihood of fixing the symptom.

Grid is 1 inch square
Dryer Igniter - Part # 1002853 Mfg Part # 33002789

Dryer Igniter

RepairClinic Item # 1002853

If the dryer doesn't heat, the igniter might be burned out. Check the igniter for continuity with an ohm meter. Dryer igniters burn out over time, similar to a light bulb.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

$26.05

Grid is 1 inch square
Main Control Board - Part # 1122533 Mfg Part # 35001153

Main Control Board

RepairClinic Item # 1122533

The main control board is normally not at fault when the dryer doesn't heat. Check all of the other components in this troubleshooting guide before replacing the main control board. The main control board cannot be tested easily and must be replaced if it is defective.

Grid is 1 inch square
Main Control Board - Part # 1185542 Mfg Part # 35001227

Main Control Board

RepairClinic Item # 1185542

The main control board is normally not at fault when the dryer doesn't heat. Check all of the other components in this troubleshooting guide before replacing the main control board. The main control board cannot be tested easily and must be replaced if it is defective.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

$190.55

Back to Symptom List