Enter Part or Model Number for best results

(Where is my model number?)

Kenmore Dryer Doesn't Heat

110.84832201

The 4 most common part(s) or condition(s) which contribute to the symptom Dryer doesn't heat are listed below. Check or test each item and watch any available videos. If you are still unable to solve the problem you may need to do additional research and troubleshooting. Remember, with our 365 Days. Period.® return policy you can return any part for any reason. So, go ahead and buy it to try it. No other parts retailer offers this unconditional return policy.

For the symptom you selected, these are the most common parts or causes, ordered by the likelihood of fixing the symptom.

Grid is 1 inch square
Thermal Fuse - Part # 2986 Mfg Part # 3392519

Thermal Fuse

RepairClinic Item # 2986

If the dryer doesn't heat, but the drum turns, check the thermal fuse(s). The thermal fuse protects the dryer from overheating and helps to prevent fires. If the thermal fuse is blown, it will have to be replaced.

Order now and this item will ship out Monday - or it's FREE!

$12.05

Grid is 1 inch square
Heating Element Assembly - Part # 525502 Mfg Part # 3387747

Heating Element Assembly

RepairClinic Item # 525502

The heating element assembly on an electric dryer can burn out over time. If the dryer doesn't heat, the element assembly should be checked for continuity. The heating element assembly cannot be repaired and must be replaced if defective.

Order now and this item will ship out Monday - or it's FREE!

$55.35

Grid is 1 inch square
High Limit Thermostat - Part # 526282 Mfg Part # 3391914

High Limit Thermostat

RepairClinic Item # 526282

Although not common, if the dryer doesn't heat the high limit thermostat can be defective. It can be checked for continuity. If the thermostat is "open" the dryer doesn't heat.

Order now and this item will ship out Monday - or it's FREE!

$40.55

Grid is 1 inch square
Main Control Board - Part # 1060737 Mfg Part # 8546219

Main Control Board

RepairClinic Item # 1060737

The main control board is normally not at fault when the dryer doesn't heat. Check all of the other components in this troubleshooting guide before replacing the main control board. The main control board cannot be tested easily and must be replaced if it is defective.

Order now and this item will ship out Monday - or it's FREE!

$237.65

Back to Symptom List