Enter Part or Model Number for best results

(Where is my model number?)

Kenmore Dryer Doesn't Heat

417.84052500

The 4 most common part(s) or condition(s) which contribute to the symptom Dryer doesn't heat are listed below. Check or test each item and watch any available videos. If you are still unable to solve the problem you may need to do additional research and troubleshooting. Remember, with our 365 Days. Period.® return policy you can return any part for any reason. So, go ahead and buy it to try it. No other parts retailer offers this unconditional return policy.

For the symptom you selected, these are the most common parts or causes, ordered by the likelihood of fixing the symptom.

Grid is 1 inch square
Thermal Fuse - Part # 1489053 Mfg Part # 134120900

Thermal Fuse

RepairClinic Item # 1489053

If the dryer doesn't heat, but the drum turns, check the thermal fuse(s). The thermal fuse protects the dryer from overheating and helps to prevent fires. If the thermal fuse is blown, it will have to be replaced.

Place your order by 3:00 PM ET and choose FedEx 2Day or FedEx Overnight shipping and this item will ship out today - or it's FREE!

Grid is 1 inch square
Heating Element Assembly - Part # 407685 Mfg Part # 131553900

Heating Element Assembly

RepairClinic Item # 407685

The heating element assembly on an electric dryer can burn out over time. If the dryer doesn't heat, the element assembly should be checked for continuity. The heating element assembly cannot be repaired and must be replaced if defective.

Place your order by 3:00 PM ET and choose FedEx 2Day or FedEx Overnight shipping and this item will ship out today - or it's FREE!

Grid is 1 inch square
High Limit Thermostat - Part # 508516 Mfg Part # 3204267

High Limit Thermostat

RepairClinic Item # 508516

Although not common, if the dryer doesn't heat the high limit thermostat can be defective. It can be checked for continuity. If the thermostat is "open" the dryer doesn't heat.

Place your order by 3:00 PM ET and choose FedEx 2Day or FedEx Overnight shipping and this item will ship out today - or it's FREE!

Grid is 1 inch square
Main Control Board - Part # 1472768 Mfg Part # 137008010

Main Control Board

RepairClinic Item # 1472768

The main control board is normally not at fault when the dryer doesn't heat. Check all of the other components in this troubleshooting guide before replacing the main control board. The main control board cannot be tested easily and must be replaced if it is defective.

Place your order by 3:00 PM ET and choose FedEx 2Day or FedEx Overnight shipping and this item will ship out today - or it's FREE!

Back to Symptom List