Enter Part or Model Number for best results

(Where is my model number?)

Kenmore Dryer Trips Breaker

110.84832201

The 4 most common part(s) or condition(s) which contribute to the symptom Dryer trips breaker are listed below. Check or test each item and watch any available videos. If you are still unable to solve the problem you may need to do additional research and troubleshooting. Remember, with our 365 Days. Period.® return policy you can return any part for any reason. So, go ahead and buy it to try it. No other parts retailer offers this unconditional return policy.

For the symptom you selected, these are the most common parts or causes, ordered by the likelihood of fixing the symptom.

Other Causes and Conditions

The Circuit Breaker is Weak

If the dryer trips the home's circuit breaker, the breaker itself might be defective. Over time circuit breakers can become weak and may trip often, even though the amperage draw is below the limit. If the dryer has been checked and seems to be fine, consider having an electrician replace the circuit breaker.

Grid is 1 inch square
Heating Element Assembly - Part # 525502 Mfg Part # 3387747

Heating Element Assembly

RepairClinic Item # 525502

When heating element assemblies fail, they sometimes short out against the heater housing. Then, the dryer trips the circuit breaker. If the circuit breaker is reset and it trips again, check the heating element assembly for a short circuit.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

$55.35

Grid is 1 inch square
Drive Motor - Part # 158 Mfg Part # 279787

Drive Motor

RepairClinic Item # 158

Although not as common, if the dryer trips the circuit breaker the drive motor may be defective. When drive motors fail, they sometimes short out internally and trip the circuit breaker.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

$142.75

Grid is 1 inch square
Terminal Block - Part # 527329 Mfg Part # 3397659

Terminal Block

RepairClinic Item # 527329

Electric dryer power cords attach to the dryer at a terminal block. If any of the wires on the terminal block are loose, they can arc and destroy part of the block. If this happens, one of the wires can short against the body of the dryer and the dryer trips the breaker. This is not common.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

$36.70

Back to Symptom List