Enter Part or Model Number for best results

(Where is my model number?)

Whirlpool Microwave Not Working

MH1150XMS3

The 4 most common part(s) or condition(s) which contribute to the symptom Microwave not working are listed below. Check or test each item and watch any available videos. If you are still unable to solve the problem you may need to do additional research and troubleshooting. Remember, with our 365 Days. Period.® return policy you can return any part for any reason. So, go ahead and buy it to try it. No other parts retailer offers this unconditional return policy.

For the symptom you selected, these are the most common parts or causes, ordered by the likelihood of fixing the symptom.

Grid is 1 inch square
Line Fuse - Part # 2629384 Mfg Part # W10422951

Line Fuse

RepairClinic Item # 2629384

Every microwave oven has a line fuse. This fuse is designed to blow if too much current is drawn through the microwave circuitry. The fuse can be replaced, but the underlying issue should still be investigated and resolved. Otherwise the new fuse will blow also.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

$14.85

Grid is 1 inch square
Main Control Board - Part # 1178021 Mfg Part # 8206448

Main Control Board

RepairClinic Item # 1178021

If the microwave is not working the main control board may be defective. This is not common. When a microwave stops working the problem is usually the line fuse or within the high voltage circuit; either the high voltage capacitor, diode, transformer or magnetron.

Grid is 1 inch square
Thermal Fuse - Part # 903784 Mfg Part # 8183698

Thermal Fuse

RepairClinic Item # 903784

If the microwave is not working the thermal fuse may have blown. It can be tested for continuity. Watch our fuse testing video for more information.

Grid is 1 inch square
Thermoprotector - Part # 903783 Mfg Part # 8183697

Thermoprotector

RepairClinic Item # 903783

If the microwave is not working the thermoprotector may have tripped. This is a safety device to prevent the microwave from overheating. It can be tested for continuity to see if it's blown.

 

Back to Symptom List