GO
SEARCH:

Panasonic Microwave Runs For a Few Seconds And Stops

NN-S244WL

The 5 most common part(s) or condition(s) which cause the symptom Microwave runs for a few seconds and stops are listed below starting with the most likely. Check or test each item and watch any available videos.

Picture Unavailable

Main Control Board

RepairClinic Item # 1363615

If the microwave runs for a few seconds and stops there may be a short circuit in the main control board. Check other components first, these boards are often misdiagnosed.

 

Picture Unavailable

Touchpad and Control Panel

RepairClinic Item # 1318965

If the microwave runs for a few seconds and stops the touchpad and control panel might be defective. There are several other components that can cause this problem, be sure to check any other components before replacing this board.

Picture Unavailable

Touchpad and Control Panel

RepairClinic Item # 1332373

If the microwave runs for a few seconds and stops the touchpad and control panel might be defective. There are several other components that can cause this problem, be sure to check any other components before replacing this board.

Picture Unavailable

Touchpad

RepairClinic Item # 1355875

If the microwave runs for a few seconds and stops the touchpad might be at fault. This is not common. Generally speaking, if the microwave display is working and some of the buttons respond correctly but some don’t, the problem is with the touchpad.

Grid is 1 inch square
High Voltage Transformer - Part # 1521103 Mfg Part # 6170W1D052U

High Voltage Transformer

RepairClinic Item # 1521103

If the microwave runs for a few seconds and stops the high voltage transformer might have an intermittent short. This is not common. Check other components related to the microwave symptom first.

$69.50

Order by 8:00 PM ET, this part ships TODAY!

Add to Cart

365 Day Return Policy

Back to Symptom List