GO
SEARCH:

Frigidaire Oven Doesn't Bake Evenly

PLEB30T8CCB

The 4 most common part(s) or condition(s) which cause the symptom Oven doesn't bake evenly are listed below starting with the most likely. Check or test each item and watch any available videos.

Grid is 1 inch square
Bake Element - Part # 2220750 Mfg Part # 318255006

Bake Element

RepairClinic Item # 2220750

If the oven doesn't bake evenly, check the bake element. The bake element is a black tube near the bottom of the oven about as thick as a pencil. When it is operating normally, the bake element will glow red hot. If the oven doesn't bake evenly, the bake element may have burned out. It is often obvious to see where the bake element has burned out because there will be a hole in the element or blisters on the outside of the element. Test the bake element using an Ohm meter. If it has continuity it's OK. If not, it should be replaced.

$65.20

Order now and this item will ship out tomorrow

Add to Cart

365 Day Return Policy

Grid is 1 inch square
Oven Control Board - Part # 499450 Mfg Part # 318010501

Oven Control Board

RepairClinic Item # 499450

The oven control board has a set of relays that turn on and off power to the bake and broil circuits according to the customer settings and sensor input. If the oven won't heat the problem is usually with the heating components. However, if the oven control board is bad, it might not send voltage to the heating components. To determine why the oven won't heat, first test the simpler components in the circuit. The oven control board can't be tested easily and will have to be replaced if it is defective.

$285.50

Order now and this item will ship out tomorrow

Add to Cart

365 Day Return Policy

Grid is 1 inch square
Broil Element - Part # 2210952 Mfg Part # 318255605

Broil Element

RepairClinic Item # 2210952

If the oven doesn't bake evenly, check the broil element. The broil element is a black tube near the top of the oven about as thick as a pencil. When it is operating normally, the broil element will glow red hot. In most ovens the broil element comes on during pre-heat. If the oven doesn't bake evenly, the broil element may have burned out. It is often obvious to see where the broil element has burned out because there will be a hole in the element or blisters on the outside of the element. Test the broil element using an Ohm meter. If it has continuity it's OK. If not, it should be replaced.

$42.15

Order now and this item will ship out tomorrow

Add to Cart

365 Day Return Policy

Grid is 1 inch square
Oven Sensor - Part # 1015027 Mfg Part # 316217002

Oven Sensor

RepairClinic Item # 1015027

If the oven doesn't bake evenly the oven sensor might be defective. The oven sensor works in conjunction with the oven control board - or clock - to regulate the temperature. The oven sensor is a simple electronic device which varies its resistance to electrical current as the temperature varies. If the oven doesn't bake evenly, this oven sensor resistance might be incorrect. For small variations, often there is a calibration feature at the control board. On many models there is a certain pattern of pushing buttons in order to calibrate the control board to the oven sensor resistance. Check the owners manual for more information.

$26.90

Order now and this item will ship out tomorrow

Add to Cart

365 Day Return Policy

Back to Symptom List