Enter Part or Model Number for best results

(Where is my model number?)

GE Oven Temperature Problem

JBS03C2WH

The 3 most common part(s) or condition(s) which contribute to the symptom Oven temperature problem are listed below. Check or test each item and watch any available videos. If you are still unable to solve the problem you may need to do additional research and troubleshooting. Remember, with our 365 Days. Period.® return policy you can return any part for any reason. So, go ahead and buy it to try it. No other parts retailer offers this unconditional return policy.

For the symptom you selected, these are the most common parts or causes, ordered by the likelihood of fixing the symptom.

Grid is 1 inch square
Bake Element - Part # 824269 Mfg Part # WB44K10005

Bake Element

RepairClinic Item # 824269

If there is an oven temperature problem, check the bake element. The bake element is a black tube near the bottom of the oven about as thick as a pencil. When it is operating normally, the bake element will glow red hot. If there is an oven temperature problem, the bake element may have burned out. In most ovens the broil element comes on during pre-heat which is enough to warm the oven up, but not to the right temperature. It is often obvious to see where the bake element has burned out because there will be a hole in the element or blisters on the outside of the element. Test the bake element using an Ohm meter. If it has continuity it's OK. If not, it should be replaced.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

$57.35

Grid is 1 inch square
Broil Element - Part # 876000 Mfg Part # WB44K10002

Broil Element

RepairClinic Item # 876000

If there is an oven temperature problem, check the broil element. The broil element is a black tube near the top of the oven about as thick as a pencil. When it is operating normally, the broil element will glow red hot. If there is an oven temperature problem, the broil element may have burned out. In most ovens the broil element comes on during pre-heat which is enough to warm the oven up, but not to the right temperature. It is often obvious to see where the broil element has burned out because there will be a hole in the element or blisters on the outside of the element. Test the broil element using an Ohm meter. If it has continuity it's OK. If not, it should be replaced.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

$46.95

Grid is 1 inch square
Oven Thermostat - Part # 824183 Mfg Part # WB20K10004

Oven Thermostat

RepairClinic Item # 824183

The oven thermostat regulates the oven temperature. If there is an oven temperature problem, this thermostat might be defective. The thermostat is very difficult to test due to its complexity. The oven thermostat has a thin copper tube attached to a slightly thicker tube which sticks into the oven. Inside this tube is a type of hydraulic fluid. As the temperature in the oven rises the fluid expands which puts pressure on a small activator inside the thermostat and shuts off the heat. As the oven cools, the pressure reduces and the activator allows the oven to heat. If there is an oven temperature problem it could be that the thermostat activator is broken, or that the calibration has changed. The solution is to replace the oven thermostat.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

$105.00

Back to Symptom List