GO
SEARCH:

Maytag Oven Temperature Problem

MEW6630BAW

The 5 most common part(s) or condition(s) which cause the symptom Oven temperature problem are listed below starting with the most likely. Check or test each item and watch any available videos.

Grid is 1 inch square
Bake Element - Part # 1810287 Mfg Part # W10310258

Bake Element

RepairClinic Item # 1810287

If there is an oven temperature problem, check the bake element. The bake element is a black tube near the bottom of the oven about as thick as a pencil. When it is operating normally, the bake element will glow red hot. If there is an oven temperature problem, the bake element may have burned out. In most ovens the broil element comes on during pre-heat which is enough to warm the oven up, but not to the right temperature. It is often obvious to see where the bake element has burned out because there will be a hole in the element or blisters on the outside of the element. Test the bake element using an Ohm meter. If it has continuity it's OK. If not, it should be replaced.

$47.10

Order by 8:00 PM ET, this part ships TODAY!

Add to Cart

365 Day Return Policy

Grid is 1 inch square
Broil Element - Part # 1862807 Mfg Part # W10310260

Broil Element

RepairClinic Item # 1862807

If there is an oven temperature problem, check the broil element. The broil element is a black tube near the top of the oven about as thick as a pencil. When it is operating normally, the broil element will glow red hot. If there is an oven temperature problem, the broil element may have burned out. In most ovens the broil element comes on during pre-heat which is enough to warm the oven up, but not to the right temperature. It is often obvious to see where the broil element has burned out because there will be a hole in the element or blisters on the outside of the element. Test the broil element using an Ohm meter. If it has continuity it's OK. If not, it should be replaced.

$53.40

Order by 8:00 PM ET, this part ships TODAY!

Add to Cart

365 Day Return Policy

Grid is 1 inch square
Oven Control Board - Part # 695197 Mfg Part # 71001872

Oven Control Board

RepairClinic Item # 695197

The oven control board has a set of relays that turn on and off power to the bake and broil circuits according to the customer settings and sensor input. If the oven won't heat correctly the problem is usually with the heating components. However, if the oven control board is bad, it might not send voltage to the heating components. To determine why the oven won't heat, first test the simpler components in the circuit. The oven control board might have failed electrically but a multi meter and the wiring diagram of the oven will be needed to determine that.

$305.25

Order by 8:00 PM ET, this part ships TODAY!

Add to Cart

365 Day Return Policy

Grid is 1 inch square
Oven Sensor - Part # 1364 Mfg Part # 12001656

Oven Sensor

RepairClinic Item # 1364

The oven sensor works with the main clock control board to regulate the oven temperature. If there is an oven temperature problem, this sensor might be defective. The sensor can be tested by using an ohm meter. As temperature rises, the resistance measurement also rises. The manufacturer of the oven sensor determines the correct resistance, if we have a testing video associated with this part, watch it to learn how to test the oven sensor. Oven temperature problems can be caused by other things, but this is one of the common causes.

$29.55

Order by 8:00 PM ET, this part ships TODAY!

Add to Cart

365 Day Return Policy

Grid is 1 inch square
Convection Motor - Part # 695186 Mfg Part # 71001858

Convection Motor

RepairClinic Item # 695186

Although it is not common, if there is an oven temperature problem during convection bake, the convection motor might be defective. If the convection motor isn't running it won't circulate the air inside the oven. An oven temperature problem is usually due to a burned out heating element or temperature control. The convection motor can be tested for continuity using an Ohm meter. Also, if the fan blade is difficult to turn by hand, the bearings in the motor might be worn. The convection motor can't be repaired, if it is defective it will have to be replaced.

$160.80

Order by 8:00 PM ET, this part ships TODAY!

Add to Cart

365 Day Return Policy

Back to Symptom List