The 2 most common part(s) or condition(s) which cause the symptom Oven self cleaning problem are listed below starting with the most likely. Check or test each item and watch any available videos.
RepairClinic Item # 499450
The oven control board has a set of relays that turn on and off power to the bake and broil circuits according to the customer settings and sensor input. An oven self-cleaning problem is sometimes caused by one of the heating components. However, if the oven control board is bad, it might not send voltage to the heating components. To determine what is causing the oven self-cleaning problem, first test the simpler components in the circuit. The oven control board can't be tested easily and will have to be replaced if it is defective.
RepairClinic Item # 499302
Although not as common, with an oven self cleaning problem the thermal fuse may have blown. The thermal fuse is designed to protect the appliance and help to prevent a fire. If the oven gets too hot, this fuse trips. The thermal fuse is not resettable and will have to be replaced. It can be checked for continuity. If it has continuity, it's OK.