Enter Part or Model Number for best results

(Where is my model number?)

Kenmore Refrigerator Not Cold Enough

106.54606300

The 5 most common part(s) or condition(s) which contribute to the symptom Refrigerator not cold enough are listed below. Check or test each item and watch any available videos. If you are still unable to solve the problem you may need to do additional research and troubleshooting. Remember, with our 365 Days. Period.® return policy you can return any part for any reason. So, go ahead and buy it to try it. No other parts retailer offers this unconditional return policy.

For the symptom you selected, these are the most common parts or causes, ordered by the likelihood of fixing the symptom.

Other Causes and Conditions

Condenser Coils are Dirty

If the refrigerator is not cold enough the condenser coils may be dirty. The condenser is like a radiator and must stay clean in order to dissipate the heat which was removed from the inside of the refrigerator. As the coils get dirtier the refrigerator becomes less efficient, which makes it work harder to cool down. If the coils are dirty enough, the unit will never be cold enough and will not be able to cool the inside of the refrigerator to the proper temperature.

Grid is 1 inch square
Evaporator Fan Motor - Part # 1194733 Mfg Part # 2315548

Evaporator Fan Motor

RepairClinic Item # 1194733

If the refrigerator is not cold enough, the evaporator fan motor might have failed. Every refrigerator has a set of coils called an evaporator. The refrigerator may have one or more evaporator fan motor(s) depending on the model and evaporator locations. The evaporator fan motor circulates the cold air from the coils thru the compartment. If there is only one evaporator it is in the freezer side. If the fan is not working, no cold air will get to the refrigerator compartment. The freezer may still get cold.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

Grid is 1 inch square
Thermistor - Part # 1057763 Mfg Part # 2188819

Thermistor

RepairClinic Item # 1057763

If the refrigerator is not cold enough the thermistor might be defective. The thermistor is a sensor which monitors the air temperature. It is connected to the control board. If the thermistor is defective the refrigerator does not cool or may cool continuously.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

Grid is 1 inch square
Temperature Control Board - Part # 961558 Mfg Part # 8201528

Temperature Control Board

RepairClinic Item # 961558

If the refrigerator is not cold enough the temperature control board might be defective. The temperature control board provides the voltage to the fan motors and compressor. These boards are often misdiagnosed. Check all other components to be certain this is the cause of the problem.

Grid is 1 inch square
Compressor - Part # 1660611 Mfg Part # W10309994

Compressor

RepairClinic Item # 1660611

If the refrigerator is not cold enough, the compressor might be defective. The compressor is a motor which compresses the refrigerant and circulates the refrigerant through the evaporator and condenser coils. There are several other components which are more likely to be defective if the compressor doesn't work. If the compressor itself is defective a licensed professional will need to replace it.

Oversize Part – Special Shipping Required

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

Back to Symptom List