Enter Part or Model Number for best results

(Where is my model number?)

Kenmore Refrigerator Not Cold Enough

106.56539400

The 3 most common part(s) or condition(s) which contribute to the symptom Refrigerator not cold enough are listed below. Check or test each item and watch any available videos. If you are still unable to solve the problem you may need to do additional research and troubleshooting. Remember, with our 365 Days. Period.® return policy you can return any part for any reason. So, go ahead and buy it to try it. No other parts retailer offers this unconditional return policy.

For the symptom you selected, these are the most common parts or causes, ordered by the likelihood of fixing the symptom.

Other Causes and Conditions

Condenser Coils are Dirty

If the refrigerator is not cold enough the condenser coils may be dirty. The condenser is like a radiator and must stay clean in order to dissipate the heat which was removed from the inside of the refrigerator. As the coils get dirtier the refrigerator becomes less efficient, which makes it work harder to cool down. If the coils are dirty enough, the unit will never be cold enough and will not be able to cool the inside of the refrigerator to the proper temperature.

Grid is 1 inch square
Evaporator Fan Motor - Part # 1194733 Mfg Part # 2315548

Evaporator Fan Motor

RepairClinic Item # 1194733

If the refrigerator is not cold enough, the evaporator fan motor might have failed. Every refrigerator has a set of coils called an evaporator. The refrigerator may have one or more evaporator fan motor(s) depending on the model and evaporator locations. The evaporator fan motor circulates the cold air from the coils thru the compartment. If there is only one evaporator it is in the freezer side. If the fan is not working, no cold air will get to the refrigerator compartment. The freezer may still get cold.

Order now and choose FedEx 2Day or FedEx Overnight shipping and this item will ship out tomorrow - or it's FREE!

$49.55

Grid is 1 inch square
Start Relay - Part # 1026721 Mfg Part # 2262185

Start Relay

RepairClinic Item # 1026721

If the refrigerator is not cold enough, the start relay may be defective. The start relay is a small device mounted to the side of the compressor. It provides power to the run winding along with the start winding for a split second at start-up to help get the compressor started. If the start relay is defective the compressor may run intermittently or not at all and the refrigerator will not get cold enough. The start relay should be replaced if defective.

Order now and choose FedEx 2Day or FedEx Overnight shipping and this item will ship out tomorrow - or it's FREE!

$29.60

Back to Symptom List