GO
SEARCH:

Samsung Refrigerator Water Dispenser Not Working

RS253BASB

The 8 most common part(s) or condition(s) which cause the symptom Refrigerator water dispenser not working are listed below starting with the most likely. Check or test each item and watch any available videos.

Other Causes and Conditions

Water Tube in Door is Frozen

If the refrigerator water dispenser is not working the water supply tube in the door may be frozen. This will be difficult to track down. Look for a connection point at the bottom or top of the door, try removing the hose and blowing air through it and out the dispenser. If air passes through, it's not frozen. If not, thaw it out. and determine where it froze in the door. Most doors are foamed in with a sleeve the water line goes thru to the dispenser. The freezer temp should be kept from 0 to 10 degrees Fahrenheit. If it is too cold the water line in the door may freeze.

Grid is 1 inch square
Water Inlet Valve - Part # 2034441 Mfg Part # DA62-00914B

Water Inlet Valve

RepairClinic Item # 2034441

If the water dispenser is not working the water pressure from the house might be too low. Water inlet valves require a minimum of 20 psi to function properly. If the pressure is good and the water filter is good, replace the water inlet valve.

Grid is 1 inch square
Water Inlet Valve - Part # 2042755 Mfg Part # DA71-20207A

Water Inlet Valve

RepairClinic Item # 2042755

If the water dispenser is not working the water pressure from the house might be too low. Water inlet valves require a minimum of 20 psi to function properly. If the pressure is good and the water filter is good, replace the water inlet valve.

$2.10

Order by 8:00 PM ET, this part ships TODAY!

Add to Cart

365 Day Return Policy

Grid is 1 inch square
Water Inlet Valve - Part # 2042756 Mfg Part # DA71-20208A

Water Inlet Valve

RepairClinic Item # 2042756

If the water dispenser is not working the water pressure from the house might be too low. Water inlet valves require a minimum of 20 psi to function properly. If the pressure is good and the water filter is good, replace the water inlet valve.

$2.10

Order by 8:00 PM ET, this part ships TODAY!

Add to Cart

365 Day Return Policy

Other Causes and Conditions

Low Water Pressure from House Supply

If the water dispenser is not working the water pressure from the house might be too low. Water inlet valves require a minimum of 20 psi to function properly.

Grid is 1 inch square
Water Filter - Part # 1554876 Mfg Part # DA29-00003G

Water Filter

RepairClinic Item # 1554876

If the refrigerator water dispenser is not working the water filter might be clogged. Try changing the water filter.

$56.55

Order by 8:00 PM ET, this part ships TODAY!

Add to Cart

365 Day Return Policy

Grid is 1 inch square
Door Switch - Part # 1488654 Mfg Part # DA34-10110E

Door Switch

RepairClinic Item # 1488654

If the refrigerator water dispenser is not working, the door switch might be defective. When the freezer door is opened the freezer door switch does two things, it turns on the light in the freezer and turns off the ice and water dispenser. If the door switch fails the dispenser will not turn on. The switch can be checked for continuity with an Ohm meter. If it doesn’t have continuity it should be replaced.

$9.90

Order by 8:00 PM ET, this part ships TODAY!

Add to Cart

365 Day Return Policy

Grid is 1 inch square
Door Switch - Part # 2030445 Mfg Part # DA34-10120E

Door Switch

RepairClinic Item # 2030445

If the refrigerator water dispenser is not working, the door switch might be defective. When the freezer door is opened the freezer door switch does two things, it turns on the light in the freezer and turns off the ice and water dispenser. If the door switch fails the dispenser will not turn on. The switch can be checked for continuity with an Ohm meter. If it doesn’t have continuity it should be replaced.

$10.70

Order by 8:00 PM ET, this part ships TODAY!

Add to Cart

365 Day Return Policy

Back to Symptom List