Enter Part or Model Number for best results

(Where is my model number?)

Samsung Refrigerator Ice Maker Overflowing

RS253BASB

The 4 most common part(s) or condition(s) which contribute to the symptom Refrigerator ice maker overflowing are listed below. Check or test each item and watch any available videos. If you are still unable to solve the problem you may need to do additional research and troubleshooting. Remember, with our 365 Days. Period.® return policy you can return any part for any reason. So, go ahead and buy it to try it. No other parts retailer offers this unconditional return policy.

For the symptom you selected, these are the most common parts or causes, ordered by the likelihood of fixing the symptom.

Grid is 1 inch square
Water Inlet Valve - Part # 2034441 Mfg Part # DA62-00914B

Water Inlet Valve

RepairClinic Item # 2034441

If the ice maker is overflowing the water pressure to the water inlet valve might be too low. The water inlet valve requires a minimum of 20 psi to shut off properly. If the pressure is lower, the valve may not close fully when the power is shut off. This results in the valve leaking water into the ice maker and causing it to overflow. If the water pressure is good, replace the water inlet valve.

Grid is 1 inch square
Water Inlet Valve - Part # 2042755 Mfg Part # DA71-20207A

Water Inlet Valve

RepairClinic Item # 2042755

If the ice maker is overflowing the water pressure to the water inlet valve might be too low. The water inlet valve requires a minimum of 20 psi to shut off properly. If the pressure is lower, the valve may not close fully when the power is shut off. This results in the valve leaking water into the ice maker and causing it to overflow. If the water pressure is good, replace the water inlet valve.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

$2.10

Grid is 1 inch square
Water Inlet Valve - Part # 2042756 Mfg Part # DA71-20208A

Water Inlet Valve

RepairClinic Item # 2042756

If the ice maker is overflowing the water pressure to the water inlet valve might be too low. The water inlet valve requires a minimum of 20 psi to shut off properly. If the pressure is lower, the valve may not close fully when the power is shut off. This results in the valve leaking water into the ice maker and causing it to overflow. If the water pressure is good, replace the water inlet valve.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

$2.10

Other Causes and Conditions

Low Water Pressure from House Supply

If the ice maker is overflowing the water pressure to the water inlet valve might be too low. The water inlet valve requires a minimum of 20 psi to shut off properly. If the pressure is lower, the valve may not close fully when the power is shut off. This results in the valve leaking water into the ice maker and causing it to overflow.

Back to Symptom List