Enter Part or Model Number for best results

(Where is my model number?)

Cub Cadet Snowblower Won't Start

The snowblower small engine often has a separate model number. Use the small engine model number for a complete list of symptoms and parts. Watch our model # lookup video for help finding the model number.

31AH75KU596/2010

The 4 most common part(s) or condition(s) which contribute to the symptom Snowblower won't start are listed below. Check or test each item and watch any available videos. If you are still unable to solve the problem you may need to do additional research and troubleshooting. Remember, with our 365 Days. Period.® return policy you can return any part for any reason. So, go ahead and buy it to try it. No other parts retailer offers this unconditional return policy.

For the symptom you selected, these are the most common parts or causes, ordered by the likelihood of fixing the symptom.

Grid is 1 inch square
Spark Plug - Part # 1621467 Mfg Part # 951-10292

Spark Plug

RepairClinic Item # 1621467

If the snowblower won't start the spark plug might be defective. All small engines have an ignition coil. The coil is the device that provides spark for the spark plug(s). If the coil is bad power won't get to the spark plug(s). The coil is essentially a small, induction generator. It is mounted next to the flywheel. The flywheel has one or more strong, embedded magnets. As the flywheel spins, the magnet(s) zip past the induction coil, this action of a magnet passing past a coil induces a voltage. Depending on the design of the coil and the strength of the magnets, a stronger or weaker spark can be created and delivered to the spark plug(s). Each time the flywheel spins around a spark is generated. The best way to test a spark plug is to use a spark plug tester. The spark plug should have a strong, visible spark between the electrodes when the engine is cranking. If it doesn't, replace it.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

$5.60

Grid is 1 inch square
Carburetor Kit - Part # 2397733 Mfg Part # 951-12760A

Carburetor Kit

RepairClinic Item # 2397733

If the snowblower won't start, the carburetor might be clogged or have bad fuel in the float bowl. If old fuel was left in the snowblower for a long time some of the volatile ingredients may have evaporated, leaving a thicker, stickier product that is more like varnish or shellac. This sticky fuel can clog up the small jets and ports in the carburetor assembly and it can be difficult to burn making the snowblower engine run roughly. The only solution is to drain the old fuel from the float bowl and thoroughly clean the carburetor assembly with carburetor assembly cleaner. If that isn't effective, rebuild the carburetor with this carburetor kit.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

$28.85

Grid is 1 inch square
Ignition Coil - Part # 1843711 Mfg Part # 951-11305

Ignition Coil

RepairClinic Item # 1843711

If the snowblower won't start the ignition coil might be defective. All snowblower engines have an ignition coil. The coil is the device that provides spark for the spark plug(s). If the coil is bad power won't get to the spark plug(s). The coil is essentially a small, induction generator. It is mounted next to the flywheel. The flywheel has one or more strong, embedded magnets. As the flywheel spins, the magnet(s) zip past the induction coil, this action of a magnet passing past a coil induces a voltage. Depending on the design of the coil and the strength of the magnets, a stronger or weaker spark can be created and delivered to the spark plug(s). Each time the flywheel spins around a spark is generated. The best way to test the ignition coil is to use a spark plug tester to see if the spark plug is getting a spark. If it is, the ignition coil is working properly.

Grid is 1 inch square
Flywheel Key - Part # 1843368 Mfg Part # 951-10307

Flywheel Key

RepairClinic Item # 1843368

If the snowblower won't start the flywheel key might have sheared in half. The flywheel key is a small metal shim which fits into a slot in the crankshaft and engages with the flywheel. If the snowblower auger hits a rock or other solid object the sudden stoppage of the auger can cause the flywheel key to shear. The only way to know for sure if this is the problem is to remove the flywheel and inspect the flywheel key.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

$2.95

Back to Symptom List