GO
SEARCH:

Craftsman Snowblower Auger Won't Turn

247.887791

The 4 most common part(s) or condition(s) which cause the symptom Snowblower auger won't turn are listed below starting with the most likely. Check or test each item and watch any available videos.

Grid is 1 inch square
Belt: V-Belt - Part # 1726984 Mfg Part # 954-04013

Belt: V-Belt

RepairClinic Item # 1726984

If the snowblower auger won't turn the belt might be broken or worn out. A belt makes the connection between the engine and the auger, sometimes directly driving the auger and sometimes powering the auger through a gearbox. If the belt is worn out, misadjusted, or broken the auger won't turn.

$10.45

Order by 8:00 PM ET, this part ships TODAY!

Add to Cart

365 Day Return Policy

Grid is 1 inch square
Belt: V-Belt - Part # 1726985 Mfg Part # 954-04014

Belt: V-Belt

RepairClinic Item # 1726985

If the snowblower auger won't turn the belt might be broken or worn out. A belt makes the connection between the engine and the auger, sometimes directly driving the auger and sometimes powering the auger through a gearbox. If the belt is worn out, misadjusted, or broken the auger won't turn.

$12.75

Order by 8:00 PM ET, this part ships TODAY!

Add to Cart

365 Day Return Policy

Grid is 1 inch square
Bearing - Part # 1828797 Mfg Part # 741-04108

Bearing

RepairClinic Item # 1828797

If the auger won't turn one or more of the bearings might have seized. Most bearings are permanently lubricated and don't require maintenance. If yours has a grease fitting, fresh grease should be added according to the manufacturers instructions. Once the bearing seizes it will have to be replaced. Sometimes the bearing can be freed up to work temporarily, but that fix is usually temporary.

$2.90

Order by 8:00 PM ET, this part ships TODAY!

Add to Cart

365 Day Return Policy

Grid is 1 inch square
Auger Cable - Part # 1843123 Mfg Part # 946-04640

Auger Cable

RepairClinic Item # 1843123

If the snowblower auger won't turn the auger cable might be broken or need to be adjusted. When the auger cable is engaged the auger system should rotate. Sometimes there is a spring tension system for adjusting the cable tension. If the cable tension can not be adjusted or the cable is broken a new auger cable replacement is in order.

Back to Symptom List