GO
SEARCH:

Craftsman Snowblower Auger Won't Turn

536.88185

The 5 most common part(s) or condition(s) which cause the symptom Snowblower auger won't turn are listed below starting with the most likely. Check or test each item and watch any available videos.

Grid is 1 inch square
Shear Pin - Part # 1783476 Mfg Part # 1501227MA

Shear Pin

RepairClinic Item # 1783476

If the snowblower auger won't turn the shear pin may have failed. The shear bolt is a metal bolt that slides through the auger axle sleeve to lock it in place with the auger drive axle. If the auger hits a rock or other object, the shear bolt is designed to cut in half and fall out in order to protect the auger, gearbox and other components. If the auger won't turn, check to see if the shear bolt is in place and intact. If not, replace it.

$10.85

Order by 8:00 PM ET, this part ships TODAY!

Add to Cart

365 Day Return Policy

Grid is 1 inch square
Belt: V-Belt - Part # 1668676 Mfg Part # 585416MA

Belt: V-Belt

RepairClinic Item # 1668676

If the snowblower auger won't turn the belt might be broken or worn out. A belt makes the connection between the engine and the auger, sometimes directly driving the auger and sometimes powering the auger through a gearbox. If the belt is worn out, misadjusted, or broken the auger won't turn.

$17.95

Order by 8:00 PM ET, this part ships TODAY!

Add to Cart

365 Day Return Policy

Grid is 1 inch square
Belt: V-Belt - Part # 2204111 Mfg Part # 1733324SM

Belt: V-Belt

RepairClinic Item # 2204111

If the snowblower auger won't turn the belt might be broken or worn out. A belt makes the connection between the engine and the auger, sometimes directly driving the auger and sometimes powering the auger through a gearbox. If the belt is worn out, misadjusted, or broken the auger won't turn.

$13.85

Order by 8:00 PM ET, this part ships TODAY!

Add to Cart

365 Day Return Policy

Grid is 1 inch square
Bearing - Part # 1668745 Mfg Part # 334163MA

Bearing

RepairClinic Item # 1668745

If the auger won't turn one or more of the bearings might have seized. Most bearings are permanently lubricated and don't require maintenance. If yours has a grease fitting, fresh grease should be added according to the manufacturers instructions. Once the bearing seizes it will have to be replaced. Sometimes the bearing can be freed up to work temporarily, but that fix is usually temporary.

$6.85

Order by 8:00 PM ET, this part ships TODAY!

Add to Cart

365 Day Return Policy

Grid is 1 inch square
Bearing - Part # 1668776 Mfg Part # 9517MA

Bearing

RepairClinic Item # 1668776

If the auger won't turn one or more of the bearings might have seized. Most bearings are permanently lubricated and don't require maintenance. If yours has a grease fitting, fresh grease should be added according to the manufacturers instructions. Once the bearing seizes it will have to be replaced. Sometimes the bearing can be freed up to work temporarily, but that fix is usually temporary.

$3.65

Order by 8:00 PM ET, this part ships TODAY!

Add to Cart

365 Day Return Policy

Back to Symptom List