Enter Part or Model Number for best results

(Where is my model number?)

Dirt Devil Vacuum Cleaner Brush Not Spinning

UD30000

The 3 most common part(s) or condition(s) which contribute to the symptom Vacuum cleaner brush not spinning are listed below. Check or test each item and watch any available videos. If you are still unable to solve the problem you may need to do additional research and troubleshooting. Remember, with our 365 Days. Period.® return policy you can return any part for any reason. So, go ahead and buy it to try it. No other parts retailer offers this unconditional return policy.

For the symptom you selected, these are the most common parts or causes, ordered by the likelihood of fixing the symptom.

Grid is 1 inch square
Drive Belt - Part # 1602909 Mfg Part # 3720310001

Drive Belt

RepairClinic Item # 1602909

If the vacuum cleaner brush is not spinning the drive belt might be broken, stretched out too much, or might have fallen off. Check the belt and replace as needed.

$3.25

Grid is 1 inch square
Brushroll - Part # 1605964 Mfg Part # 2863005000

Brushroll

RepairClinic Item # 1605964

If the vacuum cleaner brush is not spinning, the brushroll itself might be jammed. Try removing the brushroll and cleaning all hair, string, lint, etc. from the brushroll bearings. If that doesn't solve the problem the brushroll may need to be replaced.

 

Grid is 1 inch square
Brushroll Assembly - Part # 1606148 Mfg Part # 2PL1113000

Brushroll Assembly

RepairClinic Item # 1606148

If the vacuum cleaner brush is not spinning, the brushroll assembly itself might be jammed. Try removing the brushroll assembly and cleaning all hair, string, lint, etc. from the brushroll bearings. If that doesn't solve the problem the brushroll may need to be replaced.

 

Back to Symptom List