Enter Part or Model Number for best results

(Where is my model number?)

Vacuum Cleaner Belt Keeps Breaking

The 4 most common part(s) or condition(s) which contribute to the symptom Vacuum cleaner belt keeps breaking are listed below. Check or test each item and watch any available videos. If you are still unable to solve the problem you may need to do additional research and troubleshooting. Remember, with our 365 Days. Period.® return policy you can return any part for any reason. So, go ahead and buy it to try it. No other parts retailer offers this unconditional return policy.


Enter your model number for the best repair help results:


For the symptom you selected, these are the most common parts or causes, ordered by the likelihood of fixing the symptom.

Picture Unavailable

Brushroll

If the vacuum cleaner belt keeps breaking the brushroll might be sticking, causing too much friction and putting too much strain on the belt. Remove the brushroll and clean any hair, string or lint from the bearings. Replace the brushroll and make sure it turns freely.

Enter your model number to see parts for your vacuum cleaner.

Help me find my model number

Picture Unavailable

Brushroll Assembly

If the vacuum cleaner belt keeps breaking the brushroll assembly might be sticking, causing too much friction and putting too much strain on the belt. Remove the brushroll assembly and clean any hair, string or lint from the bearings. Replace the brushroll and make sure it turns freely.

Enter your model number to see parts for your vacuum cleaner.

Help me find my model number

Picture Unavailable

Brushroll Bearing

If the vacuum cleaner belt keeps breaking the brushroll bearing might be sticking, causing too much friction and putting too much strain on the belt. Remove the brushroll assembly and clean any hair, string or lint from the bearings. Replace the brushroll and make sure it turns freely.

Enter your model number to see parts for your vacuum cleaner.

Help me find my model number

Picture Unavailable

Brushroll Cover

If the vacuum cleaner belt keeps breaking the brushroll cover might be rubbing against the belt, causing too much friction and putting too much strain on the belt. Remove the brushroll cover and clean any hair, string or lint from the brushroll. Replace the brushroll and make sure it turns freely. Then, check the belt to see if that has solved the problem.

Enter your model number to see parts for your vacuum cleaner.

Help me find my model number

Back to Symptom List