GO
SEARCH:

Crosley Washer Won't Spin

CW6500W

The 9 most common part(s) or condition(s) which cause the symptom Washer won't spin are listed below starting with the most likely. Check or test each item and watch any available videos.

Grid is 1 inch square
Lid Switch Assembly - Part # 1456 Mfg Part # 12001187

Lid Switch Assembly

RepairClinic Item # 1456

If the washer won't spin the lid switch assembly might be defective. This is a very common problem. The lid switch assembly can fail either mechanically or electrically. Test any electrical switches with an Ohm meter for continuity. The switches should have continuity according to their design.

$34.65

Order by 8:00 PM ET, this part ships TODAY!

Add to Cart

365 Day Return Policy

Grid is 1 inch square
Drive Belt - Part # 1318 Mfg Part # 21352320

Drive Belt

RepairClinic Item # 1318

If the washer won't spin, check the drive belt. If the belt is broken or if it isn't tight on the pulleys the washer won't spin properly.

$13.50

Order by 8:00 PM ET, this part ships TODAY!

Add to Cart

365 Day Return Policy

Grid is 1 inch square
Drive Pulley - Part # 1042142 Mfg Part # 12002213

Drive Pulley

RepairClinic Item # 1042142

If the washer won't spin then the drive pulley might be worn out, seized, or damaged. Remove the drive pulley and inspect it carefully. If it is damaged or defective replace it.

Hazardous Material – Special Shipping Required

$43.40

Order now and this item will ship out TODAY!

Add to Cart

365 Day Return Policy

Grid is 1 inch square
Drive Motor - Part # 1023733 Mfg Part # 21001950

Drive Motor

RepairClinic Item # 1023733

If the washer won't spin the drive motor might be defective. This is not common. Check all of the other related parts to this symptom before replacing the motor. If the motor is visibly burned out or physically damaged It will have to be replaced.

Oversize Part – Special Shipping Required

$121.15

Order by 8:00 PM ET, this part ships TODAY!

Add to Cart

365 Day Return Policy

Grid is 1 inch square
Tub Bearing - Part # 400538 Mfg Part # 12001562

Tub Bearing

RepairClinic Item # 400538

If the washer won't spin the tub bearing might need to be replace. This is a very involved repair and will require disassembling most of the washer. The manufacturer recommends that if possible the complete outer tub and bearing be replaced rather than attempting to replace just the bearing in the tub. If the bearing is bad the problem is going to get worse very quickly and so either the drum and bearing will need to be replaced or the washing machine.

$28.10

Order by 8:00 PM ET, this part ships TODAY!

Add to Cart

365 Day Return Policy

Grid is 1 inch square
Tub Seal and Bearing Kit - Part # 1482428 Mfg Part # W10219156

Tub Seal and Bearing Kit

RepairClinic Item # 1482428

If the washer won't spin the tub seal and bearing kit might need to be replace. This is a very involved repair and will require disassembling most of the washer. If the bearing is bad the problem is going to get worse very quickly and so either the tub seal and bearing kit will need to be replaced or the washing machine.

$80.60

Order by 8:00 PM ET, this part ships TODAY!

Add to Cart

365 Day Return Policy

Grid is 1 inch square
Bearing - Part # 2394 Mfg Part # 35-3570

Bearing

RepairClinic Item # 2394

If the washer won't spin the tub bearing might need to be replace. This is a very involved repair and will require disassembling most of the washer. The manufacturer recommends that if possible the complete outer tub and bearing be replaced rather than attempting to replace just the bearing in the tub. If the bearing is bad the problem is going to get worse very quickly and so either the drum and bearing will need to be replaced or the washing machine.

$20.40

Order by 8:00 PM ET, this part ships TODAY!

Add to Cart

365 Day Return Policy

Grid is 1 inch square
Bearing - Part # 3462 Mfg Part # 35-2205

Bearing

RepairClinic Item # 3462

If the washer won't spin the tub bearing might need to be replace. This is a very involved repair and will require disassembling most of the washer. The manufacturer recommends that if possible the complete outer tub and bearing be replaced rather than attempting to replace just the bearing in the tub. If the bearing is bad the problem is going to get worse very quickly and so either the drum and bearing will need to be replaced or the washing machine.

$20.40

Order by 8:00 PM ET, this part ships TODAY!

Add to Cart

365 Day Return Policy

Grid is 1 inch square
Transmission - Part # 1472816 Mfg Part # 35-6615

Transmission

RepairClinic Item # 1472816

If the washer won't spin the transmission might be worn out or defective. There are numerous more likely causes when a washer won't spin, which should be checked first.

Oversize Part – Special Shipping Required

$321.80

Order by 8:00 PM ET, this part ships TODAY!

Add to Cart

365 Day Return Policy

Back to Symptom List