Enter Part or Model Number for best results

(Where is my model number?)

Frigidaire Washer Won't Spin

FWX6970EW3

The 4 most common part(s) or condition(s) which contribute to the symptom Washer won't spin are listed below. Check or test each item and watch any available videos. If you are still unable to solve the problem you may need to do additional research and troubleshooting. Remember, with our 365 Days. Period.® return policy you can return any part for any reason. So, go ahead and buy it to try it. No other parts retailer offers this unconditional return policy.

For the symptom you selected, these are the most common parts or causes, ordered by the likelihood of fixing the symptom.

Grid is 1 inch square
Drive Belt - Part # 1156860 Mfg Part # 134511600

Drive Belt

RepairClinic Item # 1156860

If the washer won't spin, check the drive belt. If the belt is broken or if it isn't tight on the pulleys the washer won't spin properly.

Place your order by 3:00 PM ET and choose FedEx 2Day or FedEx Overnight shipping and this item will ship out today - or it's FREE!

$12.00

Grid is 1 inch square
Drive Pulley - Part # 823044 Mfg Part # 131498301

Drive Pulley

RepairClinic Item # 823044

If the washer won't spin then the drive pulley might be worn out, seized, or damaged. Remove the drive pulley and inspect it carefully. If it is damaged or defective replace it.

Place your order by 3:00 PM ET and choose FedEx 2Day or FedEx Overnight shipping and this item will ship out today - or it's FREE!

$34.50

Grid is 1 inch square
Drive Motor - Part # 1154705 Mfg Part # 134183200

Drive Motor

RepairClinic Item # 1154705

If the washer won't spin the drive motor might be defective. This is not common. Check all of the other related parts to this symptom before replacing the motor. If the motor is visibly burned out or physically damaged It will have to be replaced.

Oversize Part – Special Shipping Required

Place your order by 3:00 PM ET and choose FedEx 2Day or FedEx Overnight shipping and this item will ship out today - or it's FREE!

$222.65

Grid is 1 inch square
Bearing - Part # 508644 Mfg Part # 3204405

Bearing

RepairClinic Item # 508644

If the washer won't spin the tub bearing might need to be replace. This is a very involved repair and will require disassembling most of the washer. The manufacturer recommends that if possible the complete outer tub and bearing be replaced rather than attempting to replace just the bearing in the tub. If the bearing is bad the problem is going to get worse very quickly and so either the drum and bearing will need to be replaced or the washing machine.

Place your order by 3:00 PM ET and choose FedEx 2Day or FedEx Overnight shipping and this item will ship out today - or it's FREE!

$40.10

Back to Symptom List