GO
SEARCH:

LG Washer Won't Spin

WM2301HR

The 4 most common part(s) or condition(s) which cause the symptom Washer won't spin are listed below starting with the most likely. Check or test each item and watch any available videos.

Grid is 1 inch square
Stator Assembly - Part # 1519490 Mfg Part # 4417EA1002K

Stator Assembly

RepairClinic Item # 1519490

If the washer won't spin the stator assembly at the back of the washer tub might be bad or damaged. The rotor is essentially one half of a motor, it interacts with the tub by creating a strong electro-magnet. If the rotor fails or is damaged the washer might not spin or agitate. Check the rotor for damaged magnets or other defects.

$134.80

Order by 8:00 PM ET, this part ships TODAY!

Add to Cart

365 Day Return Policy

Grid is 1 inch square
Rotor Assembly - Part # 1519486 Mfg Part # 4413ER1003B

Rotor Assembly

RepairClinic Item # 1519486

If the washer won't spin the rotor assembly at the back of the washer tub might be bad or damaged. The rotor is essentially one half of a motor, it interacts with the tub by creating a strong electro-magnet. If the rotor fails or is damaged the washer might not spin or agitate. Check the rotor for damaged magnets or other defects.

$69.50

Order by 8:00 PM ET, this part ships TODAY!

Add to Cart

365 Day Return Policy

Grid is 1 inch square
Tub Bearing - Part # 1267498 Mfg Part # 4280FR4048E

Tub Bearing

RepairClinic Item # 1267498

If the washer won't spin the tub bearing might need to be replace. This is a very involved repair and will require disassembling most of the washer. The manufacturer recommends that if possible the complete outer tub and bearing be replaced rather than attempting to replace just the bearing in the tub. If the bearing is bad the problem is going to get worse very quickly and so either the drum and bearing will need to be replaced or the washing machine.

$21.95

Order by 8:00 PM ET, this part ships TODAY!

Add to Cart

365 Day Return Policy

Grid is 1 inch square
Tub Bearing - Part # 1267500 Mfg Part # 4280FR4048L

Tub Bearing

RepairClinic Item # 1267500

If the washer won't spin the tub bearing might need to be replace. This is a very involved repair and will require disassembling most of the washer. The manufacturer recommends that if possible the complete outer tub and bearing be replaced rather than attempting to replace just the bearing in the tub. If the bearing is bad the problem is going to get worse very quickly and so either the drum and bearing will need to be replaced or the washing machine.

$33.15

Order by 8:00 PM ET, this part ships TODAY!

Add to Cart

365 Day Return Policy

Back to Symptom List