Enter Part or Model Number for best results

(Where is my model number?)

GE Washer Won't Spin

WHDRR418G1WW

The 7 most common part(s) or condition(s) which contribute to the symptom Washer won't spin are listed below. Check or test each item and watch any available videos. If you are still unable to solve the problem you may need to do additional research and troubleshooting. Remember, with our 365 Days. Period.® return policy you can return any part for any reason. So, go ahead and buy it to try it. No other parts retailer offers this unconditional return policy.

For the symptom you selected, these are the most common parts or causes, ordered by the likelihood of fixing the symptom.

Grid is 1 inch square
Lid Switch Assembly - Part # 1256927 Mfg Part # WH12X10334

Lid Switch Assembly

RepairClinic Item # 1256927

If the washer won't spin the lid switch assembly might be defective. This is a very common problem. The lid switch assembly can fail either mechanically or electrically. Test any electrical switches with an Ohm meter for continuity. The switches should have continuity according to their design.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

$15.80

Grid is 1 inch square
Drive Belt - Part # 1264395 Mfg Part # WH01X10302

Drive Belt

RepairClinic Item # 1264395

If the washer won't spin, check the drive belt. If the belt is broken or if it isn't tight on the pulleys the washer won't spin properly.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

$11.10

Grid is 1 inch square
Clutch - Part # 1475792 Mfg Part # WH38X10017

Clutch

RepairClinic Item # 1475792

If the washer won't spin, the clutch assembly might be worn out. The clutch assembly makes the connection between the transmission and the inner tub. It is designed to allow the tub to get up to the proper spin speed gradually. As the clutch wears out it may prevent the tub from spinning. The clutch is not repairable, if it is loud or not working properly it will need to be replaced.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

$114.75

Grid is 1 inch square
Drive Pulley - Part # 1264466 Mfg Part # WH07X10019

Drive Pulley

RepairClinic Item # 1264466

If the washer won't spin then the drive pulley might be worn out, seized, or damaged. Remove the drive pulley and inspect it carefully. If it is damaged or defective replace it.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

$28.15

Picture Unavailable

Drive Motor

RepairClinic Item # 3029966

If the washer won't spin the drive motor might be defective. This is not common. Check all of the other related parts to this symptom before replacing the motor. If the motor is visibly burned out or physically damaged It will have to be replaced.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

$215.35

Grid is 1 inch square
Tub Bearing - Part # 279136 Mfg Part # WH2X1198

Tub Bearing

RepairClinic Item # 279136

If the washer won't spin the tub bearing might need to be replace. This is a very involved repair and will require disassembling most of the washer. The manufacturer recommends that if possible the complete outer tub and bearing be replaced rather than attempting to replace just the bearing in the tub. If the bearing is bad the problem is going to get worse very quickly and so either the drum and bearing will need to be replaced or the washing machine.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

$15.60

Grid is 1 inch square
Tub Bearing - Part # 1394382 Mfg Part # WH02X10265

Tub Bearing

RepairClinic Item # 1394382

If the washer won't spin the tub bearing might need to be replace. This is a very involved repair and will require disassembling most of the washer. The manufacturer recommends that if possible the complete outer tub and bearing be replaced rather than attempting to replace just the bearing in the tub. If the bearing is bad the problem is going to get worse very quickly and so either the drum and bearing will need to be replaced or the washing machine.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

$3.60

Back to Symptom List