Enter Part or Model Number for best results

(Where is my model number?)

Hotpoint Washer Won't Spin

VBXR1090DBWW

The 6 most common part(s) or condition(s) which contribute to the symptom Washer won't spin are listed below. Check or test each item and watch any available videos. If you are still unable to solve the problem you may need to do additional research and troubleshooting. Remember, with our 365 Days. Period.® return policy you can return any part for any reason. So, go ahead and buy it to try it. No other parts retailer offers this unconditional return policy.

For the symptom you selected, these are the most common parts or causes, ordered by the likelihood of fixing the symptom.

Grid is 1 inch square
Lid Switch Assembly - Part # 2319707 Mfg Part # WH12X10531

Lid Switch Assembly

RepairClinic Item # 2319707

If the washer won't spin the lid switch assembly might be defective. This is a very common problem. The lid switch assembly can fail either mechanically or electrically. Test any electrical switches with an Ohm meter for continuity. The switches should have continuity according to their design.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

$12.50

Grid is 1 inch square
Drive Belt - Part # 3481 Mfg Part # WH1X2026

Drive Belt

RepairClinic Item # 3481

If the washer won't spin, check the drive belt. If the belt is broken or if it isn't tight on the pulleys the washer won't spin properly.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

$6.30

Grid is 1 inch square
Drive Motor - Part # 1195901 Mfg Part # WH49X10040

Drive Motor

RepairClinic Item # 1195901

If the washer won't spin the drive motor might be defective. This is not common. Check all of the other related parts to this symptom before replacing the motor. If the motor is visibly burned out or physically damaged It will have to be replaced.

Grid is 1 inch square
Tub Bearing - Part # 279136 Mfg Part # WH2X1198

Tub Bearing

RepairClinic Item # 279136

If the washer won't spin the tub bearing might need to be replace. This is a very involved repair and will require disassembling most of the washer. The manufacturer recommends that if possible the complete outer tub and bearing be replaced rather than attempting to replace just the bearing in the tub. If the bearing is bad the problem is going to get worse very quickly and so either the drum and bearing will need to be replaced or the washing machine.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

$15.60

Grid is 1 inch square
Tub Bearing - Part # 1394382 Mfg Part # WH02X10265

Tub Bearing

RepairClinic Item # 1394382

If the washer won't spin the tub bearing might need to be replace. This is a very involved repair and will require disassembling most of the washer. The manufacturer recommends that if possible the complete outer tub and bearing be replaced rather than attempting to replace just the bearing in the tub. If the bearing is bad the problem is going to get worse very quickly and so either the drum and bearing will need to be replaced or the washing machine.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

$3.60

Grid is 1 inch square
Transmission - Part # 279566 Mfg Part # WH38X10002

Transmission

RepairClinic Item # 279566

If the washer won't spin the transmission might be worn out or defective. There are numerous more likely causes when a washer won't spin, which should be checked first.

Oversize Part – Special Shipping Required

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

$227.75

Back to Symptom List