Enter Part or Model Number for best results

(Where is my model number?)

LG Washer is Making Loud Noise

WM2077CW/01

The 6 most common part(s) or condition(s) which contribute to the symptom Washer is making loud noise are listed below. Check or test each item and watch any available videos. If you are still unable to solve the problem you may need to do additional research and troubleshooting. Remember, with our 365 Days. Period.® return policy you can return any part for any reason. So, go ahead and buy it to try it. No other parts retailer offers this unconditional return policy.

For the symptom you selected, these are the most common parts or causes, ordered by the likelihood of fixing the symptom.

Grid is 1 inch square
Tub Bearing - Part # 1267498 Mfg Part # 4280FR4048E

Tub Bearing

RepairClinic Item # 1267498

If the washer is making a loud noise the tub bearing might need to be replace. This is a very involved repair and will require disassembling most of the washer. The manufacturer recommends that if possible the complete outer tub and bearing be replaced rather than attempting to replace just the bearing in the tub. If the bearing is bad the problem is going to get worse very quickly and so either the drum and bearing will need to be replaced or the washing machine.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

Grid is 1 inch square
Tub Bearing - Part # 1267500 Mfg Part # 4280FR4048L

Tub Bearing

RepairClinic Item # 1267500

If the washer is making a loud noise the tub bearing might need to be replace. This is a very involved repair and will require disassembling most of the washer. The manufacturer recommends that if possible the complete outer tub and bearing be replaced rather than attempting to replace just the bearing in the tub. If the bearing is bad the problem is going to get worse very quickly and so either the drum and bearing will need to be replaced or the washing machine.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

Grid is 1 inch square
Rear Drum with Bearing - Part # 1463056 Mfg Part # AJQ35154203

Rear Drum with Bearing

RepairClinic Item # 1463056

If the washer is making a loud noise the rear drum with bearing might need to be replace. On this washer the bearing might not be sold separately, the entire rear drum might have to be replaced. This is a very involved repair and will require disassembling most of the washer. However, the problem is going to get worse very quickly and so either the drum and bearing will need to be replaced or the washing machine.

Oversize Part – Special Shipping Required

Grid is 1 inch square
Drain Pump - Part # 2003273 Mfg Part # 4681EA2001T

Drain Pump

RepairClinic Item # 2003273

If the washer is making a loud noise the drain pump might be going bad or might have something caught in it. Remove the drain pump from the washer and inspect it carefully. Look for anything that might be caught in it, a piece of wire, plastic, etc. If nothing is wrong with the pump, but it's still noisy it will have to be replaced.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

Grid is 1 inch square
Water Inlet Valve - Part # 1268123 Mfg Part # 5220FR2006H

Water Inlet Valve

RepairClinic Item # 1268123

If the washer is noisy or loud, particularly when the washer is filling, the water inlet valve may be at fault. The noise can be caused by a restriction in the valve from mineral deposits. If it is the water inlet valve that's loud during the fill cycle it will need to be replaced. It is not safe to take apart these valves as they can fail and flood after disassembly.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

Grid is 1 inch square
Water Inlet Valve - Part # 1268130 Mfg Part # 5221ER1003A

Water Inlet Valve

RepairClinic Item # 1268130

If the washer is noisy or loud, particularly when the washer is filling, the water inlet valve may be at fault. The noise can be caused by a restriction in the valve from mineral deposits. If it is the water inlet valve that's loud during the fill cycle it will need to be replaced. It is not safe to take apart these valves as they can fail and flood after disassembly.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

Back to Symptom List