GO
SEARCH:

GE Washer is Making Loud Noise

WHRE5550K2WW

The 9 most common part(s) or condition(s) which cause the symptom Washer is making loud noise are listed below starting with the most likely. Check or test each item and watch any available videos.

Grid is 1 inch square
Tub Bearing - Part # 279136 Mfg Part # WH2X1198

Tub Bearing

RepairClinic Item # 279136

If the washer is making a loud noise the tub bearing might need to be replace. This is a very involved repair and will require disassembling most of the washer. The manufacturer recommends that if possible the complete outer tub and bearing be replaced rather than attempting to replace just the bearing in the tub. If the bearing is bad the problem is going to get worse very quickly and so either the drum and bearing will need to be replaced or the washing machine.

$15.60

Order by 8:00 PM ET, this part ships TODAY!

Add to Cart

365 Day Return Policy

Grid is 1 inch square
Tub Bearing - Part # 1394382 Mfg Part # WH02X10265

Tub Bearing

RepairClinic Item # 1394382

If the washer is making a loud noise the tub bearing might need to be replace. This is a very involved repair and will require disassembling most of the washer. The manufacturer recommends that if possible the complete outer tub and bearing be replaced rather than attempting to replace just the bearing in the tub. If the bearing is bad the problem is going to get worse very quickly and so either the drum and bearing will need to be replaced or the washing machine.

$3.60

Order by 8:00 PM ET, this part ships TODAY!

Add to Cart

365 Day Return Policy

Grid is 1 inch square
Drive Pulley - Part # 1264466 Mfg Part # WH07X10019

Drive Pulley

RepairClinic Item # 1264466

If the washer is making a loud noise the drive pulley might be worn out, cracked, loose or bent. Remove the drive pulley and inspect it carefully. If it is damaged or defective replace it.

$28.15

Order by 8:00 PM ET, this part ships TODAY!

Add to Cart

365 Day Return Policy

Grid is 1 inch square
Clutch - Part # 1475792 Mfg Part # WH38X10017

Clutch

RepairClinic Item # 1475792

If the washer is making a loud noise in the spin cycle, the clutch assembly might be worn out. The clutch assembly makes the connection between the transmission and the inner tub. It is designed to allow the tub to get up to the proper spin speed gradually. As the clutch wears out it may become loud during spin or just after the spin cycle finishes. The clutch is not repairable, if it is loud or not working properly it will need to be replaced.

$114.75

Order by 8:00 PM ET, this part ships TODAY!

Add to Cart

365 Day Return Policy

Grid is 1 inch square
Drive Belt - Part # 1264395 Mfg Part # WH01X10302

Drive Belt

RepairClinic Item # 1264395

If the washer is making a loud noise the drive belt might be defective. Over time the drive belt will dry out and start cracking, eventually a piece of the belt can break off resulting in a loud noise whenever the motor is running.

$11.10

Order by 8:00 PM ET, this part ships TODAY!

Add to Cart

365 Day Return Policy

Picture Unavailable

Drain Pump

RepairClinic Item # 908512

If the washer is making a loud noise the drain pump might be going bad or might have something caught in it. Remove the drain pump from the washer and inspect it carefully. Look for anything that might be caught in it, a piece of wire, plastic, etc. If nothing is wrong with the pump, but it's still noisy it will have to be replaced.

 

Grid is 1 inch square
Drain Pump - Part # 3015301 Mfg Part # WH23X10030

Drain Pump

RepairClinic Item # 3015301

If the washer is making a loud noise the drain pump might be going bad or might have something caught in it. Remove the drain pump from the washer and inspect it carefully. Look for anything that might be caught in it, a piece of wire, plastic, etc. If nothing is wrong with the pump, but it's still noisy it will have to be replaced.

$42.80

Order by 8:00 PM ET, this part ships TODAY!

Add to Cart

365 Day Return Policy

Grid is 1 inch square
Drive Motor - Part # 1796660 Mfg Part # WH20X10076

Drive Motor

RepairClinic Item # 1796660

If the washer is making a loud noise the drive motor bearings may have worn out. Washer motors are normally almost silent when they run. If the motor is run without a belt hooked up to it and it's loud it will have to be replaced.

Grid is 1 inch square
Water Inlet Valve - Part # 1159233 Mfg Part # WH13X10024

Water Inlet Valve

RepairClinic Item # 1159233

If the washer is noisy or loud, particularly when the washer is filling, the water inlet valve may be at fault. The noise can be caused by a restriction in the valve from mineral deposits. If it is the water inlet valve that's loud during the fill cycle it will need to be replaced. It is not safe to take apart these valves as they can fail and flood after disassembly.

$40.40

Order by 8:00 PM ET, this part ships TODAY!

Add to Cart

365 Day Return Policy

Back to Symptom List