Enter Part or Model Number for best results

(Where is my model number?)

Maytag Washer Won't Drain

MAH8700AWW

The 4 most common part(s) or condition(s) which contribute to the symptom Washer won't drain are listed below. Check or test each item and watch any available videos. If you are still unable to solve the problem you may need to do additional research and troubleshooting. Remember, with our 365 Days. Period.® return policy you can return any part for any reason. So, go ahead and buy it to try it. No other parts retailer offers this unconditional return policy.

For the symptom you selected, these are the most common parts or causes, ordered by the likelihood of fixing the symptom.

Grid is 1 inch square
Drain Pump - Part # 1122394 Mfg Part # 34001320

Drain Pump

RepairClinic Item # 1122394

If the washer won't drain water the drain pump might be defective. It's also common for a small sock or other article of clothing to get caught in the drain pump or in the drain hose. Check both for an obstruction before replacing the pump.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

Grid is 1 inch square
Drain Pump - Part # 1185351 Mfg Part # 34001340

Drain Pump

RepairClinic Item # 1185351

If the washer won't drain water the drain pump might be defective. It's also common for a small sock or other article of clothing to get caught in the drain pump or in the drain hose. Check both for an obstruction before replacing the pump.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

Other Causes and Conditions

Clogged Pump or Hose

If the washer won't drain there might be a clogged pump or hose. It's common for small socks or other small clothing items to get into the water drain system and clog the hose leading to the pump or the pump itself. Remove the hoses from the pump in order to remove the article of clothing. Keep in mind that any water in the washer will pour out of the hoses when removed.

Grid is 1 inch square
Drive Belt - Part # 1185395 Mfg Part # 34001411

Drive Belt

RepairClinic Item # 1185395

If the washer won't drain, should check the drive belt. If the belt is broken or if it isn't tight on the pulleys the washer won't drain properly, if at all.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

Back to Symptom List