Enter Part or Model Number for best results

(Where is my model number?)

Maytag Washer Won't Drain

MAV6000AWW

The 5 most common part(s) or condition(s) which contribute to the symptom Washer won't drain are listed below. Check or test each item and watch any available videos. If you are still unable to solve the problem you may need to do additional research and troubleshooting. Remember, with our 365 Days. Period.® return policy you can return any part for any reason. So, go ahead and buy it to try it. No other parts retailer offers this unconditional return policy.

For the symptom you selected, these are the most common parts or causes, ordered by the likelihood of fixing the symptom.

Grid is 1 inch square
Drain Pump - Part # 1480289 Mfg Part # 35-6465

Drain Pump

RepairClinic Item # 1480289

If the washer won't drain water the drain pump might be defective. It's also common for a small sock or other article of clothing to get caught in the drain pump or in the drain hose. Check both for an obstruction before replacing the pump.

Order now and this item will ship out tomorrow - or it's FREE!

Other Causes and Conditions

Clogged Pump or Hose

If the washer won't drain there might be a clogged pump or hose. It's common for small socks or other small clothing items to get into the water drain system and clog the hose leading to the pump or the pump itself. Remove the hoses from the pump in order to remove the article of clothing. Keep in mind that any water in the washer will pour out of the hoses when removed.

Grid is 1 inch square
Drive Belt - Part # 824667 Mfg Part # 22003483

Drive Belt

RepairClinic Item # 824667

If the washer won't drain, should check the drive belt. If the belt is broken or if it isn't tight on the pulleys the washer won't drain properly, if at all.

Order now and this item will ship out tomorrow - or it's FREE!

Grid is 1 inch square
Lid Switch Assembly - Part # 916383 Mfg Part # 12001908

Lid Switch Assembly

RepairClinic Item # 916383

If the washer won't drain the lid switch assembly might be defective. This is a very common problem. The lid switch assembly can fail either mechanically or electrically. Test any electrical switches with an Ohm meter for continuity. The switches should have continuity according to their design.

Order now and this item will ship out tomorrow - or it's FREE!

Grid is 1 inch square
Drain Hose - Part # 824653 Mfg Part # 22003410

Drain Hose

RepairClinic Item # 824653

If the washer won't drain water check the drain hose. Be sure the hose did not get kinked behind the washer. Also, remove the hose from the pump and check it for obstructions.

Order now and this item will ship out tomorrow - or it's FREE!

Back to Symptom List