GO
SEARCH:

Kenmore Washer Won't Drain

417.29042992

The 4 most common part(s) or condition(s) which cause the symptom Washer won't drain are listed below starting with the most likely. Check or test each item and watch any available videos.

Grid is 1 inch square
Drain Pump - Part # 1467804 Mfg Part # 137108000

Drain Pump

RepairClinic Item # 1467804

If the washer won't drain water the drain pump might be defective. It's also common for a small sock or other article of clothing to get caught in the drain pump or in the drain hose. Check both for an obstruction before replacing the pump.

$81.70

Order by 8:00 PM ET, this part ships TODAY!

Add to Cart

365 Day Return Policy

Other Causes and Conditions

Clogged Pump or Hose

If the washer won't drain there might be a clogged pump or hose. It's common for small socks or other small clothing items to get into the water drain system and clog the hose leading to the pump or the pump itself. Remove the hoses from the pump in order to remove the article of clothing. Keep in mind that any water in the washer will pour out of the hoses when removed.

Grid is 1 inch square
Drive Belt - Part # 916708 Mfg Part # 134051000

Drive Belt

RepairClinic Item # 916708

If the washer won't drain, should check the drive belt. If the belt is broken or if it isn't tight on the pulleys the washer won't drain properly, if at all.

$25.80

Order by 8:00 PM ET, this part ships TODAY!

Add to Cart

365 Day Return Policy

Grid is 1 inch square
Drain Hose - Part # 379 Mfg Part # 131461200

Drain Hose

RepairClinic Item # 379

If the washer won't drain water check the drain hose. Be sure the hose did not get kinked behind the washer. Also, remove the hose from the pump and check it for obstructions.

$20.05

Order by 8:00 PM ET, this part ships TODAY!

Add to Cart

365 Day Return Policy

Back to Symptom List