Enter Part or Model Number for best results

(Where is my model number?)

LG Washer Vibration


The 3 most common part(s) or condition(s) which contribute to the symptom Washer vibration are listed below. Check or test each item and watch any available videos. If you are still unable to solve the problem you may need to do additional research and troubleshooting. Remember, with our 365 Days. Period.® return policy you can return any part for any reason. So, go ahead and buy it to try it. No other parts retailer offers this unconditional return policy.

For the symptom you selected, these are the most common parts or causes, ordered by the likelihood of fixing the symptom.

Grid is 1 inch square
Shock Absorber - Part # 1394936 Mfg Part # 383EER3001S

Shock Absorber

RepairClinic Item # 1394936

Washer vibration can occur if one or more of the shock absorbers is broken or worn out. Check the absorbers to be sure they are installed correctly and in the right position. Sometimes when a washer is moved the shock absorbers separate and have to be put back together. If they are broken or worn out, replace all at the same time.

Order now and this item will ship out Monday - or it's FREE!

Grid is 1 inch square
Rear Drum with Bearing - Part # 1516999 Mfg Part # 3045ER0048J

Rear Drum with Bearing

RepairClinic Item # 1516999

If the washer has a bad vibration in spin the rear drum with bearing might need to be replace. On this washer the bearing is not sold separately, the entire rear drum will have to be replaced. This is a very involved repair and will require disassembling most of the washer. However, if this is the problem it is going to get worse very quickly and so either the drum and bearing will need to be replaced or the washing machine.

Oversize Part – Special Shipping Required

Order now and this item will ship out Monday - or it's FREE!

Grid is 1 inch square
Leveling Leg - Part # 1526201 Mfg Part # AFC72755401

Leveling Leg

RepairClinic Item # 1526201

Washer vibration can occur if one of the leveling legs is out of adjustment. Using a carpenters level on the top of the machine, be sure to adjust each leg until the machine is level side to side and front to back. Once the machine is level, tighten the lock nuts, if equipped, on the leveling leg threaded bolt against the body of the washer to keep them from changing height.

Order now and this item will ship out Monday - or it's FREE!

Back to Symptom List