Enter Part or Model Number for best results

(Where is my model number?)

Whirlpool Washer Vibration

WTW4820XQ0

The 3 most common part(s) or condition(s) which contribute to the symptom Washer vibration are listed below. Check or test each item and watch any available videos. If you are still unable to solve the problem you may need to do additional research and troubleshooting. Remember, with our 365 Days. Period.® return policy you can return any part for any reason. So, go ahead and buy it to try it. No other parts retailer offers this unconditional return policy.

For the symptom you selected, these are the most common parts or causes, ordered by the likelihood of fixing the symptom.

Grid is 1 inch square
Suspension Rod - Part # 1878257 Mfg Part # W10349191

Suspension Rod

RepairClinic Item # 1878257

Washer vibration can occur if one or more suspension rods are broken. Check all four rods, replace any that are broken.

Order now and this item will ship out tomorrow - or it's FREE!

$61.35

Grid is 1 inch square
Drive Block - Part # 2858 Mfg Part # 389140

Drive Block

RepairClinic Item # 2858

Washer vibration can be caused by a worn out or broken drive block or bell. The drive block connects the transmission with the agitator, if it's loose or broken the agitator can wiggle back and forth during spin and cause vibration

Order now and this item will ship out tomorrow - or it's FREE!

$16.10

Grid is 1 inch square
Leveling Leg - Part # 2685116 Mfg Part # W10568619

Leveling Leg

RepairClinic Item # 2685116

Washer vibration can occur if one of the leveling legs is out of adjustment. Using a carpenters level on the top of the machine, be sure to adjust each leg until the machine is level side to side and front to back. Once the machine is level, tighten the lock nuts, if equipped, on the leveling leg threaded bolt against the body of the washer to keep them from changing height.

Order now and this item will ship out tomorrow - or it's FREE!

$4.65

Back to Symptom List