Enter Part or Model Number for best results

(Where is my model number?)

Kenmore Washer Vibration


The 2 most common part(s) or condition(s) which contribute to the symptom Washer vibration are listed below. Check or test each item and watch any available videos. If you are still unable to solve the problem you may need to do additional research and troubleshooting. Remember, with our 365 Days. Period.® return policy you can return any part for any reason. So, go ahead and buy it to try it. No other parts retailer offers this unconditional return policy.

For the symptom you selected, these are the most common parts or causes, ordered by the likelihood of fixing the symptom.

Grid is 1 inch square
Snubber Pad - Part # 1180362 Mfg Part # 8564017

Snubber Pad

RepairClinic Item # 1180362

Washer vibration can occur if the snubber pad is worn out, missing, or coated with anything sticky. Replace if it's worn out or missing.

Grid is 1 inch square
Leveling Leg - Part # 2685116 Mfg Part # W10568619

Leveling Leg

RepairClinic Item # 2685116

Washer vibration can occur if one of the leveling legs is out of adjustment. Using a carpenters level on the top of the machine, be sure to adjust each leg until the machine is level side to side and front to back. Once the machine is level, tighten the lock nuts, if equipped, on the leveling leg threaded bolt against the body of the washer to keep them from changing height.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!


Back to Symptom List