Enter Part or Model Number for best results

(Where is my model number?)

Whirlpool Washer Fills Slowly

WTW4820XQ0

The 3 most common part(s) or condition(s) which contribute to the symptom Washer fills slowly are listed below. Check or test each item and watch any available videos. If you are still unable to solve the problem you may need to do additional research and troubleshooting. Remember, with our 365 Days. Period.® return policy you can return any part for any reason. So, go ahead and buy it to try it. No other parts retailer offers this unconditional return policy.

For the symptom you selected, these are the most common parts or causes, ordered by the likelihood of fixing the symptom.

Grid is 1 inch square
Water Inlet Valve - Part # 1938138 Mfg Part # W10356257

Water Inlet Valve

RepairClinic Item # 1938138

If the washer fills very slowly, the water pressure from the house might be too low. If the pressure is good, try cleaning the screens inside the water inlet valve hose connection ports. If those are clean replace the water inlet valve.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

$55.10

Grid is 1 inch square
Water Inlet Valve - Part # 2210321 Mfg Part # W10432353

Water Inlet Valve

RepairClinic Item # 2210321

If the washer fills very slowly, the water pressure from the house might be too low. If the pressure is good, try cleaning the screens inside the water inlet valve hose connection ports. If those are clean replace the water inlet valve.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

$61.40

Other Causes and Conditions

Low Water Pressure from House Supply

If the washer fills very slowly, the water pressure from the house might be too low. If the water inlet valve isn't leaking and there are no other symptoms this problem does not need to be corrected.

Back to Symptom List