Enter Part or Model Number for best results

(Where is my model number?)

Maytag Washer Leaking Water

SAV5710AWW

The 6 most common part(s) or condition(s) which contribute to the symptom Washer leaking water are listed below. Check or test each item and watch any available videos. If you are still unable to solve the problem you may need to do additional research and troubleshooting. Remember, with our 365 Days. Period.® return policy you can return any part for any reason. So, go ahead and buy it to try it. No other parts retailer offers this unconditional return policy.

For the symptom you selected, these are the most common parts or causes, ordered by the likelihood of fixing the symptom.

Grid is 1 inch square
Drain Pump - Part # 1159224 Mfg Part # 27001233

Drain Pump

RepairClinic Item # 1159224

If the washer is leaking water the drain pump might have a hole or crack. Or, the bearings might be worn out. Replace the drain pump if it is leaking water, they're not repairable.

Order now and this item will ship out tomorrow - or it's FREE!

$52.45

Grid is 1 inch square
Tub Seal and Bearing Kit - Part # 1256957 Mfg Part # W10116790

Tub Seal and Bearing Kit

RepairClinic Item # 1256957

If the washer is leaking water the tub seal and bearing kit might need to be replace. This is usually a very involved repair and will require disassembling most of the washer.

Order now and this item will ship out tomorrow - or it's FREE!

$101.80

Grid is 1 inch square
Tub Seal and Bearing Kit - Part # 1482428 Mfg Part # W10219156

Tub Seal and Bearing Kit

RepairClinic Item # 1482428

If the washer is leaking water the tub seal and bearing kit might need to be replace. This is usually a very involved repair and will require disassembling most of the washer.

Order now and this item will ship out tomorrow - or it's FREE!

$80.60

Grid is 1 inch square
Tub Seal - Part # 549904 Mfg Part # 40015401

Tub Seal

RepairClinic Item # 549904

If the washer is leaking water the tub seal might have a tear or rip and is letting water leak past. The tub seal can be replaced. When the tub seal fails water gets into the tub bearings and usually causes the bearings to go bad also. It is a good idea to replace the tub bearings with the new tub seal. This is usually a very involved repair and will require disassembling most of the washer.

Order now and this item will ship out tomorrow - or it's FREE!

$41.15

Grid is 1 inch square
Tub to Pump Hose - Part # 793573 Mfg Part # 40094201

Tub to Pump Hose

RepairClinic Item # 793573

If the washer is leaking water the hose from the tub to the pump might be split or torn. Don't try to cut off the bad piece of hose and stretch it to fit the pump, this will put strain on the remainder of the hose and may cause a sudden and complete failure of the hose which will dump potentially hundreds or thousands of gallons of water onto the floor because the next time the washer tries to fill all of the water will end up on the floor and so the washer will never shut off the valve. Any time there is a damaged hose, replace it completely with the OEM part.

Order now and this item will ship out tomorrow - or it's FREE!

$16.70

Grid is 1 inch square
Drain Hose - Part # 550450 Mfg Part # 40053901

Drain Hose

RepairClinic Item # 550450

If the washer is leaking water check the drain hose. The most common places for the hose to spring a leak is from the connection to the pump out to the back of the washer. Another common occurrence is when the washer gets pushed too far back against the wall.

Order now and this item will ship out tomorrow - or it's FREE!

$19.85

Back to Symptom List