GO
SEARCH:

Speed Queen Washer Leaking Water

NA4522

The 7 most common part(s) or condition(s) which cause the symptom Washer leaking water are listed below starting with the most likely. Check or test each item and watch any available videos.

Grid is 1 inch square
Drain Pump - Part # 2152 Mfg Part # 31969

Drain Pump

RepairClinic Item # 2152

If the washer is leaking water the drain pump might have a hole or crack. Or, the bearings might be worn out. Replace the drain pump if it is leaking water, they're not repairable.

$98.05

Order by 8:00 PM ET, this part ships TODAY!

Add to Cart

365 Day Return Policy

Grid is 1 inch square
Drain Pump - Part # 3053 Mfg Part # 31968

Drain Pump

RepairClinic Item # 3053

If the washer is leaking water the drain pump might have a hole or crack. Or, the bearings might be worn out. Replace the drain pump if it is leaking water, they're not repairable.

$81.00

Order by 8:00 PM ET, this part ships TODAY!

Add to Cart

365 Day Return Policy

Grid is 1 inch square
Tub Seal and Bearing Kit - Part # 768887 Mfg Part # R9900552

Tub Seal and Bearing Kit

RepairClinic Item # 768887

If the washer is leaking water the tub seal and bearing kit might need to be replace. This is usually a very involved repair and will require disassembling most of the washer.

$117.40

Order by 8:00 PM ET, this part ships TODAY!

Add to Cart

365 Day Return Policy

Grid is 1 inch square
Tub Seal - Part # 874 Mfg Part # 27184

Tub Seal

RepairClinic Item # 874

If the washer is leaking water the tub seal might have a tear or rip and is letting water leak past. The tub seal can be replaced. When the tub seal fails water gets into the tub bearings and usually causes the bearings to go bad also. It is a good idea to replace the tub bearings with the new tub seal. This is usually a very involved repair and will require disassembling most of the washer.

Grid is 1 inch square
Tub Seal - Part # 545635 Mfg Part # 39122

Tub Seal

RepairClinic Item # 545635

If the washer is leaking water the tub seal might have a tear or rip and is letting water leak past. The tub seal can be replaced. When the tub seal fails water gets into the tub bearings and usually causes the bearings to go bad also. It is a good idea to replace the tub bearings with the new tub seal. This is usually a very involved repair and will require disassembling most of the washer.

$24.55

Order by 8:00 PM ET, this part ships TODAY!

Add to Cart

365 Day Return Policy

Grid is 1 inch square
Drain Hose - Part # 435794 Mfg Part # 207160

Drain Hose

RepairClinic Item # 435794

If the washer is leaking water check the drain hose. The most common places for the hose to spring a leak is from the connection to the pump out to the back of the washer. Another common occurrence is when the washer gets pushed too far back against the wall.

Grid is 1 inch square
Drain Hose - Part # 822454 Mfg Part # 39952

Drain Hose

RepairClinic Item # 822454

If the washer is leaking water check the drain hose. The most common places for the hose to spring a leak is from the connection to the pump out to the back of the washer. Another common occurrence is when the washer gets pushed too far back against the wall.

 

Back to Symptom List