Enter Part or Model Number for best results

(Where is my model number?)

Frigidaire Washer Won't Start

ATF8000FS1

The 7 most common part(s) or condition(s) which contribute to the symptom Washer won't start are listed below. Check or test each item and watch any available videos. If you are still unable to solve the problem you may need to do additional research and troubleshooting. Remember, with our 365 Days. Period.® return policy you can return any part for any reason. So, go ahead and buy it to try it. No other parts retailer offers this unconditional return policy.

For the symptom you selected, these are the most common parts or causes, ordered by the likelihood of fixing the symptom.

Grid is 1 inch square
User Control and Display Board - Part # 1154903 Mfg Part # 134503300

User Control and Display Board

RepairClinic Item # 1154903

If the washer won't start, the user control and display board may be defective. Check for power to the washer first.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

Grid is 1 inch square
User Control and Display Board - Part # 1170673 Mfg Part # 134556500

User Control and Display Board

RepairClinic Item # 1170673

If the washer won't start, the user control and display board may be defective. Check for power to the washer first.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

Grid is 1 inch square
Main Control Board - Part # 1191203 Mfg Part # 134558200

Main Control Board

RepairClinic Item # 1191203

If the washer won't start the main control board might be defective. This is not common. Check other parts and causes first.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

Grid is 1 inch square
Main Control Board - Part # 1469146 Mfg Part # 137007000

Main Control Board

RepairClinic Item # 1469146

If the washer won't start the main control board might be defective. This is not common. Check other parts and causes first.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

Grid is 1 inch square
Door or Lid Latch Assembly - Part # 1531974 Mfg Part # 131763202

Door or Lid Latch Assembly

RepairClinic Item # 1531974

If the washer won't start the lid switch assembly might be defective. This is a very common problem. The lid switch assembly can fail either mechanically or electrically. Test any electrical switches with an Ohm meter for continuity. The switches should have continuity according to their design.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

Other Causes and Conditions

Incoming Power Problem

If the washer won't start check to see if there is power at the electrical outlet which the washer is plugged into. Plug a lamp or radio into the outlet to check it. If the outlet is dead, check the circuit breakers or fuses for the home.

Grid is 1 inch square
Power Cord - Part # 1154897 Mfg Part # 134501000

Power Cord

RepairClinic Item # 1154897

If the washer won't start, check to be sure there is power to the electrical outlet for the home. If that is OK, the power cord itself might be defective. This is rare. You can check the power cord with an Ohm meter for continuity.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

Back to Symptom List